618 off the first hand - Sony NW-A35 player out of the box
I am a sports-loving person, especially a rider (although I have been abandoning the test for a year), I particularly like to ride a bike while listening to the death. I always take out two mobile phones and receive a normal answer. Phone, another open GPS record track and listen to songs. I recently finished the test and wanted to buy a player with a better point. This will make it easier for me to climb the road and raise my faith. Then I took the 628 event into the Sony A35 player.
Sony (SONY) NW-A35 Hi-Res high-definition lossless noise reduction music player mp3 (cinnabar red) 1259 yuan color from the heart, Hear Your Colors Jingdong direct link Encyclopedia 
Stacked a few days ago in the Aunt here for 1499-400 coupons, the way 50-25 bought a few mobile computer adapters
211 aging, buy in the morning and arrive in the afternoon. Until I started writing out of the box now, Jingdong's logistics has not been updated. . . It seems that 618 pressure is a bit big. What should we do in two days?
Appearance Gallery
On the front of the package, I wrote about the model, capacity, support for LDAC technology, and the small gold standard. It's a bit dirty
On the back of the package, we wrote some supporting information about the operating system, origin, and date of production.
Open the package, a box and a warranty card, want to Tucao, even if the packaging did not seal
Open the box, the upper layer is the machine, the lower layer is a small bag, which contains data lines and several sheets of walkman's unique interface. The bag is also unsealed.
The contents of the bag, a data cable, a post-sales site on a piece of paper, a note that there is a huge guide to the use of the operating system
The front is a 3.1-inch screen with the sony logo on it, the walkman logo below, and a charge indicator in the upper right corner of the screen. At first glance, it feels a little lumia
On the back, nfc logo, walkman logo, some device information. Nfc seems to only support nfc-capable Bluetooth headsets/speakers. I suggest not supporting the device when I touch it with my mobile phone.
The right side, from bottom to top (from left to right) followed by the hold key, the next / next song, pause key, volume key, power button, it is said that the previous generation a25 can not shut down, this generation a35 can, and press Feeling tough, no shaking, good workmanship
The following interface, from left to right, 3.5mm audio interface, charging port, hanging rope mouth
There is only one tf slot on the left side, the upper side is smooth, nothing is.
experience feelings
The boot is the logo of walkman, and then becomes the animation of the wavy line, as if Dafa's mobile phone is also such a wavy line? No impression. . .
The first time you turn on your phone, there are two simple settings. Select the language and date and time and forget to take a picture. . .
After booting, there is a simple explanation, support FM radio, you can sort the classification
The following navigation bar has four buttons, return from left to right, return to the playback page (equivalent to the home button), the library top button (into the song category), menu button, in the menu button to view the help, once again prompt you simple Operational logic.
In the settings you can see some simple information of this machine
Connecting to a computer presents such an interface, which is very Android-like. . . From the computer to the local copy song, transmission speed is about 20-30m / s or so, it is still quite fast, but the network tf card copy only 5m / s, the speed of the standard usb2.0 card reader. . .
Finally, I put a picture and accompanied me for more than three years of seeing no small speaker, riding in a quiet place in the wild. I usually open it and put it on for a while. . . Tied to the car every day, it's already scarred, it's been thrown many times, and it's been rained once again. It's still strong and the quality is still very good. . . But after another generation, after the Bluetooth speaker on the face, the volume of the camera itself cannot be adjusted, only the volume of the Bluetooth speaker itself can be adjusted.
to sum upBefore I bought it, I also read a lot of reviews. I also saw someone calling the a35 "the shame of a thousand yuan player." The sound quality was one of the worst ones. It wasn't hard to solve the DSD. The thrust was small and only suitable for adding. The amp is used as a turntable, but in fact, for a fungus like me, such an exquisite appearance, simple operation, and a player that plays on a burst watch are sufficient.
Antenk DIN41612 Connectors are a versatile two piece PCB connector set with feaures useful for many applications including connections for plug-in card and back-panel wiring, PCB to PCB attachment and peripheral connections for external interfaces. Features include a multitude of body sizes and styles with options that include selective contact loading, make and break contacts, contact lead length choices and contact plating variations each in .100" [2.54mm] or .200" [5.08mm] centerline spacing.
The DIN 41612 standard covers a series of two-piece backplane connectors widely used in rack-based telecommunication, computing, process control, medical, industrial automation, test and measurement and military/aerospace systems where long-term reliability is required. They consist of one to three rows of contacts in combinations of 16, 32, 48, 64, or 96 contacts on a 0.1-inch (2.54 mm) grid pitch. The 3 rows are labelled a, b and c and connectors up to 64 way if using a 96 way body can use either rows a+b or a+c. DIN 41612 Signal connectors can be rated to 1.5 amps per signal pin, at 500 volts, although these figures may be de-rated according to safety requirements or environmental conditions. Several hybrid power and coaxial configurations are available that can handle up to 5.6A or even 15A. This wealth of variations explains the very wide range of applications that they`re put to. For over 30 years these DIN 41612 `Euro Card` connectors to IEC 60603-2 have offered a highly reliable system for board interconnects. Precision contact density, low mating forces, a two piece protective design and many contact termination styles offer unlimited design opportunities. Termination methods include – straight PC, solder eyelet, wire wrap, crimp and [press fit" terminals. Insertion and removal force are controlled, and three durability grades are available. Standardisation of the connectors is a prerequisite for open systems, where users expect components from different suppliers to operate together; ept and Conec DIN 41612 are therefore fully intermateable with all other similarly compliant products from other manufacturers like Harting, Erni, Hirose and TE Connectivity, etc.
The most common connector in the DIN product line is type C, which is widely used in VMEbus systems, the DIN 41612 standard has been upgraded to meet international standards IEC 60603-2 and EN 60603-2. In the past, ept used a comb supported press-fit tool for their type C and B press-fit female connectors. To be more competitive, ept has changed to flat-rock technology (just a flat piece of steel pushed on the top of the connector) as used by many other manufacturers.
DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions.
Types
Number of contacts varies
Many variations of housing material, including different types of metal and plastic
Both angled and straight versions
Male and female
C,R,B,Q Type DIN41612 Connectors
Half C, R, B & Q Type DIN41612 Connectors
1/3 C,R, B & Q Type DIN41612 Connectors
H, F, H+F & M type DIN41612 Connectors
IDC Type DIN41612 Connectors
Female Cable Connector
High Pin Count DIN41612 Connectors
Shroud DIN41612 Connectors
Features and Benefits of Din41612 Connector:
• Indirect mating (male/female)
• Automated production processes
• Continuous quality assurance
• 3-160 contacts
• Complete interconnection system
• Numerous interface connectors
• A wide variety of hoods
• Many termination technologies provide for the lowest installed cost
• Contacts selectively gold-plated
• Tinned terminations for increased solderability
Uses
The primary use of DIN 41612 connectors are PCB Connectors and motherboards, the main acceptance would be their board to board reliable connections.
Applications of Din41612 Connector:
Applications
• Data centers
• Storage
• Servers
• Base stations
• Telecommunications equipment
• Backplane and motherboard assemblies
• Switching systems
• Modular rack systems
• Power automation
• Distributed control systems in
industrial control
• Programmable logic controllers (PLC)
• Robotics
• Test and lab equipment
• Energy distribution
• Monitoring equipment
This is not a definitive list of applications for this product. It represents some of the more common uses.
Din41612 Connector,Din 41612,Eurocard Connector Din41612,Male Din41612 Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com