How to deal with power failure or power outages - News - Global IC Trade Starts Here.

SMD aluminum electrolytic capacitor

AVX tantalum capacitor TAJB106K016RNJ stock

RF cable can be customized for other specifications

inductance

When you are using electricity, if you find a fault or a power outage, you can follow the following methods according to different situations:
1. If the meter stops or other faults occur while using electricity, you should report it to the power supply bureau immediately, and the power supply bureau will send a staff to perform the calibration or on-site processing for you. Specific contact numbers can be obtained from the Customer Service Center.
2. If you suspect that the meter is going fast or going slow, you can go to the power supply bureau to apply for the calibration meter and pre-pay the meter calibration fee. The power supply bureau will verify the meter according to the national energy meter test standard. If the error of the electric energy meter is within the allowable range, the pre-received verification fee will not be refunded. If the meter error exceeds the allowable range, the pre-received verification fee will be refunded and refunded according to the regulations (the meter will go faster) or the replenishment (table) It is slow to calculate the electricity cost of the partial electricity.
3, power outage: due to the cause of power outages, you can deal with different situations when there is a power outage.
First, when there is a power outage, you can first find out if there is a power outage at the same time for the same unit of the household or the entire building or even more customers. If there is a power outage in your household, you should check the outlet of the meter or the indoor wiring or all electrical appliances for short-circuit or disconnection, and ask the person who holds the Electrician Access License.
Second, if the incoming line fails or the multi-family power outage, it should be repaired to the power supply bureau or customer service center. The power supply bureau will solve the fault for you in the shortest possible time and restore the power supply. However, if the above situation occurs in the residential area where the distribution facility has not been officially handed over to the power supply bureau, the personnel on duty can only report the situation as a transfer or the customer directly contacts the duty officer of the community to carry out repairs.