The new energy vehicle market has entered a period of comprehensive acceleration _ Is the new energy vehicle really replacing the traditional fuel vehicle?

The development of new energy vehicles is a big trend in the future. If relevant enterprises can seize these development opportunities, meet challenges, and overcome the problems faced by them, it is just around the corner that new energy vehicles will gradually occupy the market. This paper mainly introduces the start of the replacement process of new energy vehicles, and the sector market has entered a comprehensive acceleration phase. Is new energy really replacing traditional fuel vehicles? Let's take a look at it with Xiaobian.

The new energy vehicle replacement process starts to enter the overall acceleration stage

The trend of global automotive electrification, intelligence and light weight is irreversible, and all car companies have joined the torrent of new energy vehicle manufacturing.

New energy vehicle replacement process started

Statistics show that in August 2017, China's new energy (8.310, -0.13, -1.54%) passenger car sales of 54,000 vehicles, an increase of 80.6%, an increase of 25%, slightly exceeding market expectations. In addition, the sales of new energy commercial vehicles in August is expected to reach 18,000 - 22,000, and the total sales of new energy vehicles in August will be 72,000 - 76,000.

CIC Securities Zhang Lei expects that with the arrival of passenger car purchases of “Golden September and Silver 10” and the gradual landing of passenger car purchase orders, the monthly sales volume in September is expected to exceed 90,000 units, and the annual target of 700,000 vehicles can be achieved. The production and sales of new energy vehicles have gradually strengthened, and the new energy commercial vehicles have been substantially released. The new turning point of new energy vehicles in production and sales has basically arrived.

At present, many countries have adjusted their development strategies one after another, accelerating the industrial layout in the new energy and intelligent network industries, and occupying a new round of commanding heights. In response to the timetable for some countries to stop production and sales of traditional energy vehicles, Xin Guobin, deputy minister of the Ministry of Industry and Information Technology, recently revealed that the Ministry of Industry and Information Technology has also initiated relevant research to formulate China’s own timetable for the ban on the sale of traditional fuel vehicles.

Zhang Xue, a securities analyst in the Pacific (3.690, 0.02, 0.54%), said that China was originally the country with the strongest promotion of new energy vehicles. The study launched a comprehensive ban on traditional fuel vehicles, indicating that the support is further upgraded and the strategy for developing new energy vehicles is more determined. “Overall, the economy has entered a medium-speed growth, and the L-shaped trend has been in the long-term. The new energy automobile industry has just started, and will maintain a compound growth rate of 30% in the next few years, which is the industry with the most certain growth.”

In particular, since 2017, China has launched 8 batches of “Recommended Models for Promotion and Application of New Energy Vehicles”, which has accumulated 2,538 models of 188 enterprises, accounting for more than 70% of pure electric vehicles. In addition, 12 batches of “new energy-free vehicles” have been introduced. The Catalogue of Purchase Taxes, in which three batches were released in 2017, the pace is faster than ever. According to relevant reports, the "Parallel Management Measures for the Average Fuel Consumption of Passenger Vehicle Enterprises and New Energy Energy Vehicles" will also be introduced soon. This will be the killer of the post-subsidy era of new energy vehicles, and the development of new energy vehicles will be promoted by the policy. An important turning point.

"The determination of the state to support the development of the new energy vehicle industry has been very clear. The follow-up of the double-point policy or subsidy adjustment policy will be based on this principle." Everbright Securities (13.820, 0.02, 0.14%) analyst Liu Rui expects this year Although subsidies have declined, affecting the sales of new energy vehicles, the target of 2 million vehicles in 2020 remains unchanged, and sales will still maintain a compound growth rate of nearly 40%.

High growth and high sustainability

Following Volkswagen and Jianghuai, Daimler and BAIC, Zotye and Ford, Renault Nissan recently announced the establishment of a joint venture with Dongfeng Motor (5.850, 0.00, 0.00%) Group Co., Ltd. - Yijiete New Energy Automobile Co., Ltd. The development of electric vehicles, the field of new energy vehicles has also given birth to a "marriage" between China and foreign countries. In addition, the Ministry of Transport issued a document saying that it is necessary to upgrade the professionalization level of cold chain logistics equipment and encourage the promotion and use of energy-saving and environmentally-friendly refrigerated and heat-insulated vehicles such as new energy.

In the long run, policy support is good and has a long-term mechanism. The industry leaders accelerate the binding and achieve common growth. The traditional vehicle leaders have turned to new energy vehicles, and the industry has a large space and big opportunities. In the short term, The pressure on the whole industry chain is not small. It is necessary to quickly reduce the price to make up the economy in the new country, and to improve the technical level and product performance to compete with the fuel truck. Under the pressure, the industry is still accelerating, the leading footsteps at home and abroad continue to move forward, the price reduction rate in all links exceeds expectations, and new products have opened up the real demand of the market. Zhongtai Securities firmly believes that new energy vehicles must be industries that are scarce in recent years and have high sustainability and growth.

In the direction of layout, Bohai Securities believes that the development of new energy vehicles will continue to improve in the second half of the year, and production and sales are expected to gradually increase. It is recommended to focus on investment opportunities in new energy passenger vehicles and operations, logistics special vehicles and new energy buses. In addition, with the efforts of major domestic and foreign manufacturers to increase product development and promotion, the cost-effective "explosion models" products are expected to continue to be launched, thus promoting the popularity of intelligent networked vehicles, it is recommended to focus on the "explosive models" product orders exceeded expectations And the investment opportunities brought by the impact of major industry events.

“New energy vehicles replace 'mechanical' with 'electricity'. Power battery is the core component of new energy vehicles. It has high technical content, large capital investment and strong resource endowment. It is the focus of competition in the industry. In addition, lithium carbonate The resource products represented by cobalt and metal, such as wet-membrane, lithium-ion copper foil and cathode materials, have higher thresholds and are the top priority for investors. Zhang said.

The development trend of new energy vehicles has inevitably replaced new energy vehicles with traditional fuel vehicles.

New energy vehicles refer to the use of unconventional vehicle fuels as a source of power (or the use of conventional vehicle fuels, the use of new vehicle power units), the formation of advanced technology, new technology and new structure of the car. New energy vehicles include four categories: hybrid electric vehicles, pure electric vehicles (including solar vehicles), fuel cell electric vehicles, and other new energy sources (such as supercapacitors, flywheels and other high-efficiency energy storage vehicles). Unconventional vehicle fuel refers to fuels other than gasoline, diesel, natural gas, liquefied petroleum gas, ethanol gasoline, methanol, and dimethyl ether.

Driven by the four major trends of car electrification, intelligence, lightweight, and car sharing, the trend of “redefined cars” is spreading all over the world. The “old world” of automobiles is changing, and the electrification focus of the global automotive industry has turned to electric vehicles. The giants are vying for cards, and traditional fuel vehicles will slowly become history. Emerging technologies such as car networking and autonomous driving are also driving the development of car sharing travel services towards electrification.

2.0mm Female Pin Header

2.0mm (0.079") Pitch Female Headers

Overview

2.00 mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. Options include through-hole, surface mount and can be customized for mixed technology, press-fit and pass-through terminations. The pins and blades are available in various sizes, counts, amperages, and plating.

The 2.0mm can accommodate a maximum current of 3A, with a 30 to 22 AWG wire size, and up to 40-positions. Antenk offers 2.0mm pitch female headers in either vertical or right-angle orientation at high quality and affordable China-quoted price that snuggly fits with the pins of a male header and acts as a receptacle.

The 2.0mm pitch female headers are commonly found in PC`s and are also made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.

Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).

If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.

Applications of 2.0mm Pitch Female Headers
Electronics:
LED applications
Arduino boards
Solar applications
Weighing systems

Appliances:
Air conditioner
Refrigerator
Microwave oven
Washing machine
Water heater
Shower toilet
Washer/Dryer
Stove
Automotive, Heavy Duty Military and Marine
For densely packed equipment requiring weight reduction and downsizing and for tough and harsh conditions.
Vehicle infotainment
Computer peripherals
Battery Connections
Battery connections rely on the ability of the current to pass reliable and solid current. This prevents overheating in the circuit and voltage drop.
Rechargeable battery packs
Battery balancers
Battery eliminator circuits
Medical Diagnostic and Monitoring equipment
Heart monitors

Communications

Telecoms
Datacoms

Mount Type: Through-hole vs Surface Mount
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).

Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
2.0mm vertical single row female header, 2.0mm vertical dual row female header, 2.0mm right-angle single row female header and 2.0mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.

Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
2.0mm Right-angle Dual Row female header, 2.0mm SMT Single row female header and 2.0mm SMT Dual row female header are Antenk`s SMT female headers.

Soldering Temperature for 2.0mm Pitch Female Headers
Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.

Orientation/Pin-Type: Vertical (Straight) and Right-Angle
2.0mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.

Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.

PCB Connector Stacking
For 2.0mm pitch female headers, the orientation is either offered as vertical or right-angle, which are options. Elevated sockets/female headers can be available upon request.

Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.

Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.

Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.

Single, Dual or Multiple Number of Rows
For a 2.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.

Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.

Custom 2.0mm Pitch Female Headers
Customizable 2.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.

Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.

2 Pin Header,2.0Mm Female Pin Header,2.0Mm Pcb Connector,2.0 Pcb Header,0.079" Pitch Female Headers,2.0mm Female Pin Header SMT, 2.0mm Female Pin Header THT

ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com