Commander air-conditioning refrigeration and heating industry to create the fastest speed: 10 seconds 10 degrees
On April 18th, the commander air conditioner 1 piece of honey verified the video of 10 seconds 10 degree temperature change technology was released on the network. The honey in the video quickly crystallized in 1 minute, and the frozen display visually showed the powerful cooling and heating speed of the commander air conditioner, which caused the user to discuss hotly. It can be said that the 10 seconds 10 degree temperature change technology of the commander air conditioner has ran out of the new speed of the industry, not only can popularize the high quality brand concept to more users, but also win more brand reputation for the commander air conditioner, and deepen the whole young appliance industry. Unearthing the market potential is undoubtedly also very instructive.
Deep plowing user demand command air conditioning 10 seconds 10 degrees speed first
In the era of mobile Internet, with the change of consumer subjects and the upgrading of consumption structure, more and more young users tend to choose high-quality home appliances. As a generation that grew up along with the Internet, the post-90s youth group's demand for personality and leisure is significantly higher than that of the previous generation of consumers, and they tend to choose home appliances that can quickly meet their daily needs. However, traditional air conditioners are limited by technology, and there are widespread pain points for users with slow cooling and heating, and the user experience is extremely poor.
On this basis, the video of the air conditioning and defrosting of the honey air conditioning for 1 minute was born, and the cooling and heating performance of the air conditioner in the video was significantly better than that of the traditional air conditioner, demonstrating the technical level of the leading industry. It is reported that after the national daily electrical appliance quality supervision and testing center detects that the air conditioning temperature starts to change normally, the rate of change of the outlet air temperature can exceed ten seconds (the specified model and working conditions, the test data under the laboratory). This new data has once again refreshed the temperature-making speed of the air-conditioning industry, revealing the innovative concept of commanding air-conditioning.
"This is mainly due to the frequency-driving drive technology of the commander air conditioner." The commander-in-chief said, "The frequency-driving drive technology can break the 'magic spell' of the traditional air conditioner that must reduce the operating frequency and the up-conversion rate, and achieve a significant increase in cooling and heating efficiency." In the air-conditioning industry, in order to ensure the normal operation of the compressor, the traditional air conditioners mostly choose to reduce the operating frequency and the up-conversion rate, which also causes the air-conditioning temperature to rise and fall slowly. For the first time, the commander air conditioner applies constant torque compensation control in the high frequency domain, and drives the high efficiency compressor through high-speed instantaneous detection and response electronic control to quickly reach the highest operating frequency and achieve the best user experience of rapid cooling and rapid heat.
User core drive experience interaction to shake young community
It can be said that the demonstration experiment of a piece of honey uses a vivid and interesting experimental method to let the user "understand" the 10 seconds and 10 degrees rapid temperature change technology, which also reflects the ingenuity of the commander of air conditioning. Previously, the commander air-conditioning based on the young user group, through the cross-border Xue Zhiqian 2017 national tour concert, starred in the "Rise of the Stars", to become a huge community interaction platform, to achieve seamless contact with young users . This time, using the honey experiment as a lever to shake the young community again, users can easily feel the air conditioning and efficient cooling and heating capacity by watching the contrast experiment video, which fully reflects that the commander air conditioner actively expands the interaction channel with the user as the center. In turn, the user is actively involved in the community ecological thinking of interactively driving product upgrades.
Experts pointed out that China's traditional consumption structure is gradually shifting to an emerging consumption structure, and users are still the core of this transformation process. In this context, the commander air-conditioning from the individual needs of the young group, and constantly introduce subversive products that are more in line with the needs of the times, has clearly occupied a leading position in the home appliance market. It is foreseeable that the future commander air-conditioning will inject more vitality into the in-depth development of the young home appliance industry by taking the pioneering spirit and innovative strength at the forefront of the industry.
24HR Electronic timer socket with photocell.
â‘ Light intensity setting
â‘¡ Light intensity detection
â‘¢ Countdown Timer ON & OFF
â‘£ 4 MODES:
Set > Detected: When the light intensity detection value is less than the set value, switch ON or OFF.
Detected > Set: When the light intensity detection value is greater than the set value, switch ON or OFF
ON : Always ON
OFF : Always OFF
NOTED:
1. The light intensity displayed by this machine is not the standard light intensity value (Lux), only the relative light intensity value.
2. The light intensity value is affected by the placement position and direction. Please determine the position first and then set it according to the actual light intensity detected. If you change the position or change the orientation, you need to reset the light intensity setting value suitable for the new position.
3. This product has built-in rechargeable battery. If it is not connected to AC for a long time, you need to connect the power supply to charge until the LCD can display normally.
MANUAL OPERATION
1. Press [UP" or [DOWN" to set the LUX value.
2. Press the [SET" key to start setting, and the P1 settable items will be flashed.
3. Press [UP" or [DOWN" to adjust the value.
4. Press [SET" key again to exit setting or enter next setting for countdown timer.
5. Repeat the [SET" key to start setting, and the P2 & P3 settable items will be flashed.
6. Press the [FUN" key to switch the working state in the following:
Set > Detected -> Detected > Set -> ON -> OFF
Set > Detected: Automatically switches when the detected ambient light intensity is darker than the set value
Detected >Set: Automatically switch when the detected ambient light intensity is brighter than the set value
When the brightness meets the setting conditions, the countdown starts as below:
Note:when the countdown is ON, the detected value is not displayed.
When the brightness does not meet the setting conditions, the countdown stops and waits:
After the countdown ON is reduced to 0, the countdown OFF starts immediately and the power is OFF.
After the countdown OFF is reduced to 0:
A. If the light intensity meets the set conditions, a new round of countdown will be started;
B. If the light intensity does not meet the set conditions, keep the power off and wait for the light to meet the conditions before turning on automatically.
NOTE:
1. If the power is cut off while the countdown is running, the countdown will be terminated immediately and the relay output will be off. After the power is turned on again, a new round of brightness detection will start.
2. Modifying the brightness value in the countdown operation will not affect the current countdown operation. After the off time of the current countdown, the new brightness setting value will take effect.
3. In the countdown on operation, change the setting value of the countdown on, this countdown will still be timed according to the original setting value; the new setting value will take effect when the next countdown on starts.
4. In the countdown off operation, change the setting value of countdown off, this countdown will still be timed according to the original setting value; the new setting value will take effect when the next countdown off is started.
NOTE: the brightness setting value, countdown ON or countdown OFF, any one of which is equal to 0, cannot be switched ON or OFF automatically.
Manual Control
When ON or OFF is displayed, it means that the power supply remains ON or OFF, as shown in the figure below:
Power Detection and Standby Mode
With AC power supply, the icon 
lights up and works normally.
When there is no AC power supply, the icon goes out, the brightness is not detected at this time, and the system enters the standby mode.
Photocell Timer, Photocell Timer Socket, Photocell Sensor, Photocell Sensor Socket, Sensor Plug, Sensor Switch Socket, Digital Photocell Timer, Digital Sensor Timer
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com