Summer refrigerator temperature is adjusted to a few degrees is most suitable, how to adjust the most energy-saving refrigerator

Summer is here, and when it is time to put it in the refrigerator, then how to set the temperature is the most energy-saving at this time, how much is the summer refrigerator temperature setting? How to set up the summer refrigerator?

First, the summer refrigerator temperature setting is appropriate

There are two kinds of refrigerators, one is the gear position, and the other is the temperature adjustment.

Adjust the temperature, the refrigerator compartment is between -2 and -8 degrees, and the freezer compartment temperature is around -18~-24 degrees!

The summer temperature of the refrigerator should be adjusted to 2-3 stops.

The temperature control knob of the refrigerator generally has five gear positions of 0, 1, 2, 3, 4, and 5, or 0, 1, 2, 3, 4, 5, 6, and 7 gears. The 5th, 6th, and 7th gears are strong refrigeration gears. When the temperature controller is adjusted to the strong cooling gear position, the compressor will continue to work because of the lower control temperature, and the refrigerator is almost always in a state of non-stop.

The larger the number of the thermostat, the lower the temperature of the freezer compartment. Generally, the five gears are adjusted to 2-3 gears, and the 7 gears are controlled after freezing at 3-4 degrees. Adjust again.

In summer, the temperature is high, and the internal temperature of the refrigerator will be affected. Correctly adjusting the temperature file can save electricity. The temperature range of the refrigerator is from zero to seven, and it is adjusted to 2 to 3 in the summer, which can save electricity and better refrigerate food.

The higher the temperature file on the refrigerator, the lower the temperature. If the temperature of the refrigerator is adjusted to more than 3 in the summer, the compressor is sufficient to meet the low temperature of the refrigerator. In fact, the refrigerating temperature is sufficient, and the workload is increased. And damage the life of the refrigerator.

Second, the maintenance of the summer refrigerator

We should clean the condenser and compressor of the refrigerator regularly. These two are the key refrigeration parts of the refrigerator. If you do not pay attention to cleaning and maintenance, it is a kind of damage to the refrigeration capacity of the refrigerator. The refrigerator should be placed in a ventilated and dry place at home. After each use of the refrigerator, the refrigerator should be cleaned in time. This can also kill some pathogenic bacteria and reduce the incidence of gastrointestinal diseases.

Third, how to adjust the most efficient summer refrigerator

Correctly adjusting the temperature of the refrigerator can save a lot of electricity and extend the life of the refrigerator. Many households are not satisfied with the refrigerator, which will cause overcapacity. You may wish to put some foam into the refrigerator and concentrate the food. This will keep the refrigerator temperature and reduce the power consumption of the refrigerator.

The temperature of the freezer compartment is controlled by the temperature in the freezer compartment. Look at your temperature control knob in the freezer compartment. The temperature in the refrigerator is generally 4 to 8 degrees, and in winter, the room temperature is close to this temperature, if the thermostat knob is still 3 or less.

The refrigerator compressor is rarely started. Although the temperature in the refrigerator can meet the requirements, the temperature of the freezer cannot reach below minus 18 degrees. The food is easily deteriorated. In severe cases, the food is thawed and dissolved.

In the summer, the ambient temperature is relatively high. If the thermostat knob is still at 3 or greater than 3, the compressor will work for a long time in order to meet the temperature requirements, although the temperature of the freezer compartment is lower than minus 18 degrees. The temperature in the cold room is also very low, but it wastes power and shortens the service life of the refrigerator, which is what we do not want.

Therefore, correct adjustment of the refrigerator thermostat knob can make us both fresh and energy-saving.

Industrial and Medical Display

There are many kinds of LCD classification standards, which can be divided into passive matrix and active matrix according to the driving mode

Passive matrix: Passive matrix LCD can be divided into TN-LCD(TwistedNematic LCD), STN-LCD(SuperTN-LCD) and DSTN-LCD(Doublelayer STN-LCD).

Active matrix: Active matrix LCD, also known as TFT-LCD, is widely used at present. Tft-lcd is short for thin-filmliquid-Crystal Display

The TFT-thin Film Transistor

Liquid Crystal Display

Short for TFT-LCD Liquid-CrystalDisplay

Tft-lcd has been widely used in various display equipment due to its advantages of small size, light weight, low radiation, low power consumption and full color.

Functions of TFT-LCD structure

(1) Backlight plate module: provide the source of light;

(2) Upper and lower polarizing plates, TFT Glass Substrate, liquid crystal: forming polarized light, controlling the passage of light;

(3) Color filters: Provide TFT LCD red, green and blue (three primary colors of light) sources;

(4) ITO transparent conductive layer: provide transparent conductive path;

(5) Photo Spacer: Provide a fixed height for color filters and TFT Glass Substrate. As a space for liquid crystal infusion, and as a support for the upper and lower Glass layers.

Medical Display,Medical Lcd Monitor,Medical Monitor,Medical Grade Monito

TONYA DISPLAY LIMITED , https://www.tydisplay.com