The concept of new energy vehicles has exploded! List of new energy vehicle concept stocks
A piece of news from the Ministry of Industry and Information Technology has started research and development of a fuel truck lock-up schedule, speeding up the layout of the new energy vehicle industry, and making the market for the new energy automobile industry chain in the A-share market break out.
Xiao Bian a look, it is simply fried, not only the new energy vehicle, but also lithium batteries, charging piles, Tesla and other sectors have collectively higher, the top gain; Ankai bus, Shanshan shares, Ketai power supply The blue-and-white Huateng, Yingboer, Dangsheng Technology, Wintech, Tianci Materials, Heshun Electric, Tibet Mining, Salt Lake, and Power Sources have seen a collective ups and downs. The scene is spectacular.
It is forbidden to sell fuel cars. China is not the first one, but it is the most important one! The reason is that China's passenger car production and sales reached 25 million, accounting for 28% of global car sales.
Domestic support for new energy vehicles will be upgraded again. With a thunder, China is about to set a timetable for banned traditional fuel vehicles! As a result, today, new energy vehicles collectively "smash the car."
The reason for "smashing the car" is too obvious. China has always been the country with the strongest promotion of new energy vehicles. This time, it is necessary to launch a comprehensive ban on traditional fuel vehicles, indicating that support will be further upgraded and the strategy for developing new energy vehicles will be more determined.
If the above policies are still in the pipeline, then the new energy vehicle dual-point system will soon be implemented. The power of its killer has already emerged. In August, new energy passenger cars increased by 25% from the previous month, with sales reaching 54,000 units, 10,000 more than in July.
Let's see who is "smashing the car"?In early trading today, the concept of new energy vehicles soared, the charging pile index rose by up to 4.79%, the lithium battery index rose by 4.75%, the shared car index was 4.66%, and the new energy vehicle index rose by 4.14%, ranking only fourth.
From the specific stocks, Ankai Bus (000868), Zhaofeng (300695), and Otto (002239) closed the daily limit, Xusheng shares (603305), Kodali (002850), Indy ( 300681), Blue Ocean Huateng (300484), Ketai Power (300153) also received on the daily limit board, Wanxiang Qianchao (000559), BYD (002594), Zhongneng Electric (300062), Polyfluoride (002407), Shanshan (600884), Zhongtong Bus (000957), Yaxing Bus (600213) and Yutong Bus (600066) also ranked among the top gainers.
At the same time, from the perspective of the income of actively investing in equity funds this year, Cathay Pacific Internet +, Cinda Aussie New Energy Industry and Chuangjin Hexin Resources Topic A have been ranked this year with 44.96%, 41.89% and 40.18% yields. Actively invest in the top three earnings of equity funds. It can be seen that the performance of the new energy industry is also very strong.
Whether the friends are tickle, if they have not bought a new energy car, they also want to buy some new energy car stocks and new energy auto funds to earn some money. Xiao Bian feels that the new energy is still in the trend, so give you analysis and analysis, find opportunities to get on the bus.
China's passenger car production and sales reached 25 million
Occupy 28% of global car sales
Once China has decided to ban the traditional fuel vehicle schedule, China's status as the world's largest pure electric vehicle main battlefield will be further strengthened. Because the Chinese market is too big, it is enough to completely influence the direction of the global auto market.
Is it too exaggerated? Not at all. Looking at the data, just last year, the production and sales volume of passenger cars in China reached 25 million, which is almost equivalent to the sales of the second to fifth US, Japan, Germany and India, accounting for 28 global car sales. %.
How many of these new energy vehicles are there? The sales of new energy vehicles are only 507,000. If 25 million vehicles are all replaced with new energy vehicles, the impact will not only be a person's life, the fate of a company, the rise and fall of an industry, but also the rise or sinking of a country.
2.54mm (0.1") Pitch Female Headers
Overview
The most commonly seen female headers are 2.54mm (0.1") single or double row female/socket headers. These female headers together with its male counterpart are used in connecting Arduino boards and shields together. 2.54mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Since 2.54mm pitch female header is commonly used in a lot of applications, Scondar offers numerous options for this type of female header. Orientation can either be SMT or THM, single, dual or triple row. Antenk offers 2.54mm pitch female headers in either vertical or right-angle orientation. The pins and blades are also available in various sizes, counts, amperages, and plating.
The 2.54mm can accommodate a maximum current of 3A, with a 30 to 22 AWG wire size, and up to 40-positions. Antenk offers these female headers in high quality and affordable China-quoted price that snuggly fits with the pins of a male header and acts as a receptacle.
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.
Applications of 2.54mm Pitch Female Headers
Electronics:
LED applications
Arduino boards
Arduino Pro
Arduino Mega
Solar applications
Weighing systems
Appliances:
Air conditioner
Refrigerator
Microwave oven
Washing machine
Water heater
Shower toilet
Washer/Dryer
Stove
Automotive, Heavy Duty Military and Marine
For densely packed equipment requiring weight reduction and downsizing and for tough and harsh conditions.
Vehicle infotainment
Computer peripherals
Battery Connections
Battery connections rely on the ability of the current to pass reliable and solid current. This prevents overheating in the circuit and voltage drop.
Rechargeable battery packs
Battery balancers
Battery eliminator circuits
Medical Diagnostic and Monitoring equipment
Heart monitors
Telecoms
Datacoms
Mount Type: Through-hole vs Surface Mount
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
2.54mm, 1-row vertical female header, 2.54mm, 2-row vertical female header, 2.54mm, 3-row vertical female header, 2.54mm, 1-row right-angle female header and 2.54mm, 2-row right-angle female header, 2.54mm U-
Shaped Female header, 2.54mm U-Shaped Dual Row Female header are examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
2.54mm, 2-row right-angle female header and 2.54mm, 1-row right-angle female header are Antenk`s featured SMT female headers.
Orientation/Pin-Type: Vertical (Straight), Right-Angle and U-Shaped
2.54mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight female header, right-angle female header or U-shaped female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or..
Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
U-Shaped Female Header Orientation
U-shaped orientation is characterized by the shape of the pins at one side of the header, forming a letter [U". It is often chosen for applications where repeat mating cycles are not required as it can also be used and soldered directly to both PCB's.
Each of these pin-types have different applications that fit with their specific configuration.
Single, Dual or Multiple Number of Rows
For a 2.54mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.
Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Custom 2.54mm Pitch Female Headers
Customizable 2.54 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
Pcb Header Connector,2.54Mm Female Pin Header,2.54Mm Pcb Header,2.54Mm Pcb Connector,0.1" Pitch Female Headers,2.54mm SMT Female Pin Header, THT 2.54mm Female Pin Header
ShenZhen Antenk Electronics Co,Ltd , http://www.coincellholder.com