High Luminous 120lm/W 0.6m 20W LED Tri-Proof Light Fixture

High Luminous 120lm/W 0.6m 20W LED Tri-Proof Light Fixture



Product Describtion: 
Parameter
Feature
1.Tri-proof led fixture for IP65 waterproof,dust corrosion,and pressure-proof
2.Patent and function design with imaginative appearence
3.High stability isolated driver
4.Excellent heat dissipation depending on whole aluminum housing
5.Widely use for ambient lighting application
6.Maxmium efficacy and minimum glare
7.High-tech optical design
8.No UV,No lead,No mercury
9.5 years warranty





Installation instructions
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are sloid and in good condition once packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard stuff.
4. Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly while  wiring.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well. Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid, free from electric leakage and electricity shock.
8. Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents. Lumin will not bear any responsibilities due to such deeds.  


Application
Wide beam angle with good lighting distribution is quite suitable for warehouse lighting,outdoor lighting,parking lot lighting,work shop,all industrial lighting



Matters needing attention

 1.Before installing the lighting fixtures, please read this instruction manual carefully.
 2.The lighting fixtures should be installed, connected and tested by a certified installer based on the local regulations.
 3.Lamps should always be installed or replaced with care.
 4.Please check the local voltage in accordance with the product requirements before using the product.
 5.Relamping only can be done when the power is off and the lamp is completely cooled down.
 6.When a lamp is to be cleaned, make the power off and let it cool down completely.Clean the fixture with a soft cloth and a standard PH neutral detergent. Stainless steel finishing should be maintained regularly.
 7.Misuse of, or changes to the fixture shall nullify the guarantee.
 8.Don't cover the fixtures with flammable materials.
 9.Exclusively replaced by the manufacturer or his service agent or the similar qualified person in order to avoid a hazard.


Trouble Shooting
 
Environmentally friendly
  (1) No glare, mercury, ultraviolet, infrared or other hazardous substances
  (2) Operating Temperature: -20ºC to +40ºC
  (3) Operating Humidity: 10% to 80%
  (4) Storage Temperature: -40 to +85 ºC
  (5) Storage Humidity: 10% to 80%

Best service
1.Your inquiry will be replied within 24 hours
2.Customized specificaton can be accepted
3.Protection of your sales area,ideas of design and all your private information
4.Best-trained and experienced sales follow up with your inquiries and orders

FAQ
Q1.Can I have a sample order for LED light?
A:Yes.We welcome sample order to test and check quanlity.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 3-5days,mass production time needs 1-2 weeks for order quantity more than.
Q3.Do you have any MOQ limit for LED light order?
A:Low MOQ 1pc for sample checking is avaiable.
Q4.How do you ship the goods and how long does it take to arrive?
A:We usually ship by DHL,FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5:Is it ok to print my LOGO on LED light product?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our samle.
Q6.Do you offer guarantee for the products?
A:Yes.We offer 2-5 years warranty to our producs.
 
If you want to well know more informations,pls do not hesitate to contact us.  High Luminous 120lm/W 0.6m 20W LED Tri-Proof Light Fixture



Product Describtion: 
Parameter
Feature
1.Tri-proof led fixture for IP65 waterproof,dust corrosion,and pressure-proof
2.Patent and function design with imaginative appearence
3.High stability isolated driver
4.Excellent heat dissipation depending on whole aluminum housing
5.Widely use for ambient lighting application
6.Maxmium efficacy and minimum glare
7.High-tech optical design
8.No UV,No lead,No mercury
9.5 years warranty





Installation instructions
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are sloid and in good condition once packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard stuff.
4. Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly while  wiring.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well. Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid, free from electric leakage and electricity shock.
8. Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents. Lumin will not bear any responsibilities due to such deeds.  


Application
Wide beam angle with good lighting distribution is quite suitable for warehouse lighting,outdoor lighting,parking lot lighting,work shop,all industrial lighting



Matters needing attention

 1.Before installing the lighting fixtures, please read this instruction manual carefully.
 2.The lighting fixtures should be installed, connected and tested by a certified installer based on the local regulations.
 3.Lamps should always be installed or replaced with care.
 4.Please check the local voltage in accordance with the product requirements before using the product.
 5.Relamping only can be done when the power is off and the lamp is completely cooled down.
 6.When a lamp is to be cleaned, make the power off and let it cool down completely.Clean the fixture with a soft cloth and a standard PH neutral detergent. Stainless steel finishing should be maintained regularly.
 7.Misuse of, or changes to the fixture shall nullify the guarantee.
 8.Don't cover the fixtures with flammable materials.
 9.Exclusively replaced by the manufacturer or his service agent or the similar qualified person in order to avoid a hazard.


Trouble Shooting
 
Environmentally friendly
  (1) No glare, mercury, ultraviolet, infrared or other hazardous substances
  (2) Operating Temperature: -20ºC to +40ºC
  (3) Operating Humidity: 10% to 80%
  (4) Storage Temperature: -40 to +85 ºC
  (5) Storage Humidity: 10% to 80%

Best service
1.Your inquiry will be replied within 24 hours
2.Customized specificaton can be accepted
3.Protection of your sales area,ideas of design and all your private information
4.Best-trained and experienced sales follow up with your inquiries and orders

FAQ
Q1.Can I have a sample order for LED light?
A:Yes.We welcome sample order to test and check quanlity.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 3-5days,mass production time needs 1-2 weeks for order quantity more than.
Q3.Do you have any MOQ limit for LED light order?
A:Low MOQ 1pc for sample checking is avaiable.
Q4.How do you ship the goods and how long does it take to arrive?
A:We usually ship by DHL,FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5:Is it ok to print my LOGO on LED light product?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our samle.
Q6.Do you offer guarantee for the products?
A:Yes.We offer 2-5 years warranty to our producs.
 
If you want to well know more informations,pls do not hesitate to contact us. 

USB 2.0 Hubs

USB 2.0 is a USB interface standard released in 2000 with a theoretical maximum transmission speed of 480Mbps (about 60MB/s). The port has four cables (five cables for MicroUSB and MiniUSB), and the maximum output current is 0.5A. USB 2.0 is currently the most common version of USB port, almost all computers have USB 2.0 port, most USB devices also support USB 2.0. USB 2.0 hub. The device can provide USB high speed or full speed connection on the uplink port. The device also provides USB high-speed, full-speed, or low-speed connections on the downlink port. When the uplink port is connected to an electrical environment that supports only high-speed, full-speed, and low-speed connections, the high-speed, full-speed, and low-speed USB connections on the downlink port are enabled. When the uplink port is connected to an electrical environment that supports only full or low speed connections, the USB high-speed connection on the downlink port is disabled. USB 3.0 Hubs is higher than usb 2.0 in terms of transmitting data.

Usb 2.0 Hubs,7 Port Usb 2.0 Hub,Wireless Usb 2.0 Hub,Usb C To Usb 2.0 Hub

Henan Yijiao Trading Co., Ltd , https://www.yjusbcable.com