FeaturesÂ
Small size, Low cost.
Up to 24 fibers.
Uni-tube gel-filled construction for superior fiber protection.
Two parallel FRP wire and overall glass yarn to enhance tensile resistant.
And protect cable from mechanical damage.
Designed for use with inexpensive attachment hardware.
Self-supported no messenger needed.
ApplicationsÂ
Duct, Aerial
FTTx, Access.
 Optical Characteristics Â
Fiber Type |
G.652 |
G.655 |
50/125^m |
62.5/125^m |
|
Attenuation (+20X) |
850Â nm |
 |
 |
<3.0Â dB/km |
<3.3Â dB/km |
1300Â nm |
 |
 |
<1.0Â dB/km |
<1.0Â dB/km |
|
1310Â nm |
<0.36Â dB/km |
<0.40Â dB/km |
 |
 |
|
1550Â nm |
<0.22Â dB/km |
<0.23Â dB/km |
 |
 |
|
Bandwidth |
850Â nm |
 |
 |
>500Â MHz-km |
>200Â Mhz-km |
1300Â nm |
 |
 |
>500Â MHz-km |
>500Â Mhz-km |
|
Numerical Aperture |
 |
 |
0.200±0.015 NA |
0.275±0.015 NA |
|
Cable Cut-off Wavelength λcc |
<1260Â nm |
<1450Â nm |
 |
 |
 Â
 Structure and Technical Specifications                     GYFXTY-FL(Flat Drop)
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Allowable Tensile Load  (N) |
Allowable Crush Resistance |
 Aerial Install span with 1%sag |
||||
Short Term |
Long Term |
Short Term |
Long Term | NESC Light | NESC Medium |
NESC Heavy |
|||
2~12 |
4.5*8.0 |
39 |
1800 |
750 |
2000 |
800 | 100meters | 80meters |
50meters |
14~24 |
4.9*8.4 |
45 |
1800 |
750 |
2000 |
800 | 80meters | 60meters |
40meters |
Â
 Structure and Technical Specifications               GYFXTY-FG(Round Drop)
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Allowable Tensile Load  (N) |
Allowable Crush Resistance |
 Aerial Install span with 1%sag |
||||
Short Term |
Long Term |
Short Term |
Long Term | NESC Light | NESC Medium |
NESC Heavy |
|||
2~12 |
6.5 |
35 |
1000 |
400 |
1000 |
300 | 80meters | 50meters |
30meters |
14~24 |
7.0 |
40 |
1200 |
500 |
1000 |
300 | 70meters | 40meters |
20meters |
Note: Larger spans can be achieved if necessary with installation sags larger than 1% of span.
    This datasheet can only be a reference, but not a supplement to the contract. Please contact ourÂ
    sales people for more detailed information.
   Hybrid designs (containing single mode and multi mode fiber) and composite designs (containingÂ
   copper conductors) are also available.
 We produce and tesr cable comply with following standard  Â
Mechanical Performance | |
Max Tension Performance |
IECÂ 60794-1-2-E |
Max. Operation Tension |
IECÂ 60794-1-2-E1 |
Crush Test |
IECÂ 6079Â -1-2-E3 |
Impact Test |
IECÂ 60794-1-2-E4 |
Repeated Bending |
IECÂ 60794-1-2-E6 |
Torsion Test |
IECÂ 60794-1-2-E7 |
Cable bend |
IECÂ 60794-1-2-E11A |
Attenuation Coefficient |
ITU-TÂ G.652 |
Structural Test |
IEC-60793-1-20 |
Environmental Performance | |
Temperature Cycling |
IECÂ 60794-1-2-F1 |
Water Penetration |
IECÂ 60794-1-2-F5B |
Filing Compound Flow |
IECÂ 60794-1-E14 |
Â
 You May Like Â
 You May Need : Cable Fitting for ADSS drop cableÂ
Â
Â
Payment
For large orders, T/T , L/C, and E-credit lines are all offered.
For small orders, credit-cards are accepted.
Â
Shipping & Delivery
We will send the products within 10 days.
We ship small batched by air, or large orders by container.
Â
Return and Warranty:
All products have been tested before ship out
All products have 5 years warranty. If there is no man-made problem ,we will replace or repair for you freely.
We own the best after-sale service. If any problems happen ,our team will do our best to solve for customers.
Thank you very much for viewing this page, and wish you a nice day!
Â
DescriptionFeaturesÂ
Small size, Low cost.
Up to 24 fibers.
Uni-tube gel-filled construction for superior fiber protection.
Two parallel FRP wire and overall glass yarn to enhance tensile resistant.
And protect cable from mechanical damage.
Designed for use with inexpensive attachment hardware.
Self-supported no messenger needed.
ApplicationsÂ
Duct, Aerial
FTTx, Access.
 Optical Characteristics Â
Fiber Type |
G.652 |
G.655 |
50/125^m |
62.5/125^m |
|
Attenuation (+20X) |
850Â nm |
 |
 |
<3.0Â dB/km |
<3.3Â dB/km |
1300Â nm |
 |
 |
<1.0Â dB/km |
<1.0Â dB/km |
|
1310Â nm |
<0.36Â dB/km |
<0.40Â dB/km |
 |
 |
|
1550Â nm |
<0.22Â dB/km |
<0.23Â dB/km |
 |
 |
|
Bandwidth |
850Â nm |
 |
 |
>500Â MHz-km |
>200Â Mhz-km |
1300Â nm |
 |
 |
>500Â MHz-km |
>500Â Mhz-km |
|
Numerical Aperture |
 |
 |
0.200±0.015 NA |
0.275±0.015 NA |
|
Cable Cut-off Wavelength λcc |
<1260Â nm |
<1450Â nm |
 |
 |
 Â
 Structure and Technical Specifications                     GYFXTY-FL(Flat Drop)
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Allowable Tensile Load  (N) |
Allowable Crush Resistance |
 Aerial Install span with 1%sag |
||||
Short Term |
Long Term |
Short Term |
Long Term | NESC Light | NESC Medium |
NESC Heavy |
|||
2~12 |
4.5*8.0 |
39 |
1800 |
750 |
2000 |
800 | 100meters | 80meters |
50meters |
14~24 |
4.9*8.4 |
45 |
1800 |
750 |
2000 |
800 | 80meters | 60meters |
40meters |
Â
 Structure and Technical Specifications               GYFXTY-FG(Round Drop)
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Allowable Tensile Load  (N) |
Allowable Crush Resistance |
 Aerial Install span with 1%sag |
||||
Short Term |
Long Term |
Short Term |
Long Term | NESC Light | NESC Medium |
NESC Heavy |
|||
2~12 |
6.5 |
35 |
1000 |
400 |
1000 |
300 | 80meters | 50meters |
30meters |
14~24 |
7.0 |
40 |
1200 |
500 |
1000 |
300 | 70meters | 40meters |
20meters |
Note: Larger spans can be achieved if necessary with installation sags larger than 1% of span.
    This datasheet can only be a reference, but not a supplement to the contract. Please contact ourÂ
    sales people for more detailed information.
   Hybrid designs (containing single mode and multi mode fiber) and composite designs (containingÂ
   copper conductors) are also available.
 We produce and tesr cable comply with following standard  Â
Mechanical Performance | |
Max Tension Performance |
IECÂ 60794-1-2-E |
Max. Operation Tension |
IECÂ 60794-1-2-E1 |
Crush Test |
IECÂ 6079Â -1-2-E3 |
Impact Test |
IECÂ 60794-1-2-E4 |
Repeated Bending |
IECÂ 60794-1-2-E6 |
Torsion Test |
IECÂ 60794-1-2-E7 |
Cable bend |
IECÂ 60794-1-2-E11A |
Attenuation Coefficient |
ITU-TÂ G.652 |
Structural Test |
IEC-60793-1-20 |
Environmental Performance | |
Temperature Cycling |
IECÂ 60794-1-2-F1 |
Water Penetration |
IECÂ 60794-1-2-F5B |
Filing Compound Flow |
IECÂ 60794-1-E14 |
Â
 You May Like Â
 You May Need : Cable Fitting for ADSS drop cableÂ
Â
Â
Payment
For large orders, T/T , L/C, and E-credit lines are all offered.
For small orders, credit-cards are accepted.
Â
Shipping & Delivery
We will send the products within 10 days.
We ship small batched by air, or large orders by container.
Â
Return and Warranty:
All products have been tested before ship out
All products have 5 years warranty. If there is no man-made problem ,we will replace or repair for you freely.
We own the best after-sale service. If any problems happen ,our team will do our best to solve for customers.
Thank you very much for viewing this page, and wish you a nice day!
Â
Connector 2.00Mm Pitch,Ph Connector Accessories,Ph Connectors Accessories,Strip Wire Connectors
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiwafer.com