Pipe Telecommunication WiFi Antenna Tower Galvanized Single Tube Communication Tower
Main features as following:
Â
Polygonal Faces/Round FacesÂ
Connection: Flange Connection / Overlap ConnectionÂ
Material:Â Q345BÂ & Q235Â Â
Details: Can be designed as per customer's requirementsÂ
Delivery Lead Time: 25 days after receiving deposit    Â
Coating: Hot Dip Galvanization minimum  86mic .
Working&Resting Platform Quantity:1-3PCSÂ
Antenna Support: 3-18 PCS
Microwave Dish: 3-18 PCS
Minimum order quantity: 1set
Lifetime: Minimum 25 years
Parts: All necessary parts for installation and connection
Others: As per customer's request and drawings .
Height |
5m ~80 m |
Suit for |
Airport ,seaport,plaza,stadium ,square,highway,street way etc |
Shape |
Conoid ,Multi-pyramidal,Columniform,polygonal or conical  |
Material |
Usually   Q345B/A572,minimum yield strength>=345n/mm2              Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52-3 |
Torlance of dimenstion |
+- 2% |
Design detail |
Cable and Ladder inside or outside as request or design  |
Working &Resting Platform |
1~3 pcs at the top or in the middle |
Antenna Support |
3-18 PCS Â |
Microwave Dish |
3-18 PCS Â |
Design Load in Kg |
300~ 1000 Kg appliced to 50cm from the to pole |
Marks |
Nane palte through rivert or glue ,engrave ,emboss as per customer requirement |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. Â |
Joint of Poles |
Insert mode,innerflange mode,face to face joint mode . Â |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
5-300 KM/H Â |
Minimum yield strength |
355 mpa |
Minimum ultimate tensile strength |
490 mpa |
Max ultimate tensile strength |
620 mpa |
Standard |
ISO 9001 |
Length of per section |
Within 14m once forming without slip joint |
Welding |
We has past flaw testing.Internal and external double welding makes the welding beautiful in shape  Welding Standard :AWS ( American Welding Society ) D 1.1  |
Thickness |
1 mm to 30 mm |
Production Process |
Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. |
Dash Mining Machine:Bitmain Antminer D7 (1286Gh),Baikal BK-G28,Baikal BK-X,Baikal Giant+ A2000,Innosilicon A5 DashMaster,iBeLink DM22G,Bitmain Antminer D3 (15Gh),StrongU STU-U6,Bitmain Antminer D5 (119Gh)
In short, Dashcoin Dash is a variant of the Bitcoin cryptocurrency that runs on the same blockchain network. Dashi, which combines the words "digital" and "cash," has become one of the most widely watched counterfeit coins in recent months. Originally released as "XCoin", it was later changed to "Darkcoin" and later Dash.
Arguably the biggest benefit of Dashi is that its transactions can be sent completely anonymously, just like legal cash payments. This is achieved by using a hybrid protocol that operates a dedicated network of servers called Masternodes. While Bitcoin operates only a single-layer network of miners, Dashcoin uses these master nodes as additional layers to its network, eliminating the need for a trusted third party to authorise a transaction that could compromise the anonymity of any payment.
Another major difference between Dashcoin and Bitcoin is that the former distributes mining rewards between its mining community, participants holding a specified amount of Dash, and the Dash community's long-term development fund.
Dash Miner,Dash Mining Machine,Bitmain antminer d7, D7 miner,X11 algorithm
Shenzhen YLHM Technology Co., Ltd. , https://www.asicminer-ylhm.com