Lighting the home with solar chargers and dischargers

It is mainly used in family and grassland nomadic industries, using solar power to provide lighting, heating and watching TV for families.

1. It has strong anti-interference characteristics and is designed with anti-interference circuit.

2. Avoid over-discharge recovery, as long as there is an over-discharge, the controller will lock, automatically cut off the load, completely protect the battery, and then avoid the load flashing back and forth.

3. Charging mode adopts high-efficiency PWM charging mode, which increases the power consumption time; normal direct charging, multiple floating charging, constant voltage and small current charging automatic control mode make the system have a longer service life; improve the system's use efficiency . When the battery reaches the overcharge voltage, the charging circuit is disconnected. In order to achieve overcharge protection, the common way in the market is to short-circuit the solar panels, which will have an impact on the life of the solar panels. In fact, the solar panels are not allowed to be short-circuited.

4. Adopt advanced non-contact control and temperature compensation control. The control chips used are all industrial grades. They can be used normally in cold, humid and high temperature environments, and can adapt to harsh outdoor environments.

5. With overcharge, over discharge, battery polarity reverse connection protection (internal fuse is blown, can be used after replacement), battery open circuit protection, solar cell polarity reverse connection protection, anti-back charge and other automatic control, the above protection is not It can damage components such as batteries, solar cells, and this controller.

6. There is an intuitive LED lighting tube to reflect the current working status of the system, so that users can understand the usage.

The LED1 light is on to indicate that it is charging. (The light flashes to indicate that the battery is fully charged)

LED2 light indicates that the load terminal has a normal voltage.

LED1 LED2 all off indicates that the battery voltage is too low and is in over-discharge protection.

Seven. Working mode: single output, single load. All the above functions. Over discharge protection is off.


1

Polythene Tape

Polyethylene tape refers to the adhesive tape products with polyethylene as the base material and adhesive compound on the other side. Alias polyethylene adhesive tape, compound polyethylene tape, coated polyethylene tape;

And because the product is mainly used for pipeline anti-corrosion, so also known as polyethylene anti-corrosion adhesive tape, polyethylene anti-corrosion adhesive tape, anti-corrosion adhesive tape;

At the same time, because it can be cold winding construction in anticorrosion operation, it is commonly known as polyethylene cold winding tape, polyethylene cold winding tape, pipeline anticorrosion cold winding tape, pipeline cold winding tape, cold winding tape and cold winding tape.

Heat shrinkable film is Polythene Tape, it has hot shrinkage function after irradiation tensile , can be enshrouded content fused into an organic whole when used during heating, insulation, sealing, waterproof, and so on.

It's a transparent electrical Insulation Tape,together with other Electrical Tapes,Insulating Tape and Special Adhesive,become our best-selling products.


Polythene Tape,Vinyl Electrical Tape,Pipe Wrap Insulation Tape,Electrical Insulation Tape

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com