WEB EXCLUSIVE: Enhanced protection for LEDs using Parylene
Parylene coatings ensure an even, conformal, lightweight coating that also penetrates into every crevice, regardless of how seemingly inaccessible. LEDs today
Over the years LED lighting has grown from a few specific uses to replace many types of standard lighting due to its reliability, energy efficiency and cost-effective operation. Today LED technology can be found in a wide array of applications including large display signs, computerized Transit signage, traffic signals, streetlights and exterior lights on aircraft and automobiles.
Twelve million LEDs are illuminating a new 30 story electronic billboard in New York . The display covers two sides of a skyscraper, occupying almost 16,000 square feet with lighted animation. The dropping cost of LEDs and advanced imaging technology is allowing engineers to achieve this type of Massive display at a cost that was not feasible in earlier years.
![]()
Fig. 1 Because most cities are feeling a financial crunch, they are looking at ways to bring down basic operation costs. Up to 30% of annual energy costs tend to go to city lighting. As replacements for high-intensity lighting in public facilities and for street lighting. This can cut energy costs by up to a third or more.
While not yet seeing the expanded use as in outdoor and signage lighting, LEDs are growing in automotive use for both interior and exterior lighting applications. The benefits of small size, low power consumption and long life make them very attractive. The technology also adapts very Well to new automotive innovations such as daytime headlights, turn signals and interior illumination.
These operating environments, however, pose a challenge to manufacturers as LEDs must survive extreme temperatures, moisture and ultraviolet (UV) exposure. If the assemblies are not protected, prolonged exposure to these elements will shorten the 100,000 hour LED life expectancy. To add To long life with little maintenance, they all require some form of protective coating.
Another issue is the total weight of the massive animated displays, such as the signage noted above, which can reach up to 250,000 lbs and beyond. When looking at these massive outdoor sign displays, adding weight through protective coatings for circuit boards and the LEDs themselves Is not advantage.
![]()
Fig. 2 Issues with conformal coatings
Standard conformal coatings, such as silicones, acrylics, urethanes, and potting compounds, were sufficient for less rugged applications. Thick or uneven coating can cause light distortion and add weight to the LED assemblies and many coatings will lose performance characteristics under UV exposure and environmental Wear and tear.
All of these conformal coating formulations and the various methods used to apply them have benefits for many areas of electronics manufacturing; however, several issues have come to light when using them to protect LED products.
First, liquid coatings are often uneven and, thus, may have voids. These voids are pathways for moisture to get through to circuit boards and cause performance failure of the LEDs. These failures can be expensive when considering the large number of LED boards used in Digital display and video signage, such as those used for sports venues and large billboards along the highways and in the city centers.
![]()
Fig. 3. Uncoated board Additionally, the heaviness of many standard coatings is a drawback as they can induce stresses to delicate components, which may cause damage. This added weight on large signage displays can pose an engineering challenge due to the additional structural framework necessary Finally, it is not uncommon for thick or uneven coatings to distort the light coming from the LEDs.
Over the long-term, none of the liquid coatings or compounds can hold up to prolonged exposure to UV light. For some LED applications this may not be an issue, but obviously many types of LED boards are exposed to UV light on a continual basis And the coating must protect the board in these applications. UV exposure can damage a board fairly quickly and the cost to do continual maintenance on such LED displays, transit signage, etc. can quickly add up.
The Parylene alternative
An alternative to common industry coating materials is Parylene conformal coatings. With several variants, including a new high temperature and UV stable variant, Parylene offers a coating alternative that is extremely thin and perfectly conformal, and provides long-term protection for the full product life — regardless of the size or complexity of the end product.
![]()
Fig. 4. Board with Parylene coating Parylene is the generic name for a unique series of polymeric organic coating materials. They are polycrystalline and linear in nature, possessive dielectric and barrier properties per unit thickness, and are chemically inert. Parylene coatings are ultra -thin, pinhole-free and truly conform to components due to its molecular level polymerization — basically “growing†on the deposition surface one molecule at a time.
The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The vapor is then transferred to an ambient temperature chamber where it spontaneously polymerizes onto the parts. The vapor is then transferred into an ambient temperature chamber where it spontaneously polymerizes onto the parts The singularity of catalysts or plasticizers are used in the coating process. The Parylene process is carried out in a closed system under a controlled vacuum, with the deposition chamber remaining at room temperature throughout the process.
Because there is no liquid phase in this deposition process, there are no subsequent meniscus, pooling or bridging effects as seen in the application of liquid coatings, thus dielectric properties are never compromised. The molecular "growth" of Parylene coatings also support not only an Even, conformal coating at the thickness specified by the manufacturer, but because Parylene is formed from a gas, it also penetrates into every crevice, regardless of how seemingly inaccessible. This ensures complete encapsulation of the substrate without bridging small openings.
![]()
Fig. 5. Parylene process Due to the method by which they are deposited, Parylene coatings are extremely lightweight, offering excellent barrier properties without adding dimension or significant mass to delicate components. Parylene is typically applied in thickness ranging from 500 angstroms to 75 microns. A 25 micron coating, for example, will have a dielectric capability in excess of 7,000 volts. No other coating material can be applied as thinly as Parylene and still provide the same level of protection.
A few of the key benefits of Parylene coatings include: UV stability: Unlike other conformal coating formulations, Parylene provides measurable protection from degradation and discoloration from ultraviolet light exposure. Parylene coatings are stable at operating temperatures up to 350°C and can also withstand short-term exposures to 450° C. Moisture resistance: Parylene coatings provide excellent moisture barrier properties to protect components from failures due to moisture, fluid and chemical exposure. Smallest molecular structure: The extremely small molecular size of Parylene allows it to ingress deep into open areas on the top or bottom of any package, regardless of the size or complexity of integrated devices. Lowest dielectric constant and dissipation factor: Parylene has an extremely low Dielectric constant and dissipation factor, enabling it to provide small, tigh It has been demonstrated that the voltage breakdown per unit thickness increases with decreasing Parylene film thickness.
Parylene supports the future
LEDs consume up to 80% less energy than traditional incandescent lights and 50% less than fluorescent lighting, without the mercury waste disposal hazard issues faced with current compact fluorescent lamps. The ecological benefits, making them ideal for all types of lighting replacements, from industrial and municipal to residential and within all types of consumer devices.
Protecting these gems of lighting power will become a growing issue as the roadmap for their use continues to expand. Parylene coatings can benefit LED applications in the automotive, aerospace, electronics and military industries — wherever LED assemblies require protection from high temperatures and UV exposure. For large display signage, where electrical failures, moisture ingress and UV damage are common occurrences, the ability of Parylene to completely coat underneath, around and between the smallest crevices, devices and wiring, without affecting the light emitting from the LEDs, offers both time And cost savings in repair and maintenance.
Parylene conformal coatings provide unsurpassed protection for many LED applications today, ensuring high reliability and longer life for customer end products, such reducing overall cost of maintenance, repair and replacement. About the Author Alan Hardy is the automotive, electronics & military market manager for Specialty Coating Systems .![]()
December 2008 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2004 2005 2006 2007 2008 2009 
Over the years LED lighting has grown from a few specific uses to replace many types of standard lighting due to its reliability, energy efficiency and cost-effective operation. Today LED technology can be found in a wide array of applications including large display signs, computerized Transit signage, traffic signals, streetlights and exterior lights on aircraft and automobiles.
Twelve million LEDs are illuminating a new 30 story electronic billboard in New York . The display covers two sides of a skyscraper, occupying almost 16,000 square feet with lighted animation. The dropping cost of LEDs and advanced imaging technology is allowing engineers to achieve this type of Massive display at a cost that was not feasible in earlier years.
While not yet seeing the expanded use as in outdoor and signage lighting, LEDs are growing in automotive use for both interior and exterior lighting applications. The benefits of small size, low power consumption and long life make them very attractive. The technology also adapts very Well to new automotive innovations such as daytime headlights, turn signals and interior illumination.
These operating environments, however, pose a challenge to manufacturers as LEDs must survive extreme temperatures, moisture and ultraviolet (UV) exposure. If the assemblies are not protected, prolonged exposure to these elements will shorten the 100,000 hour LED life expectancy. To add To long life with little maintenance, they all require some form of protective coating.
Another issue is the total weight of the massive animated displays, such as the signage noted above, which can reach up to 250,000 lbs and beyond. When looking at these massive outdoor sign displays, adding weight through protective coatings for circuit boards and the LEDs themselves Is not advantage.
Standard conformal coatings, such as silicones, acrylics, urethanes, and potting compounds, were sufficient for less rugged applications. Thick or uneven coating can cause light distortion and add weight to the LED assemblies and many coatings will lose performance characteristics under UV exposure and environmental Wear and tear.
All of these conformal coating formulations and the various methods used to apply them have benefits for many areas of electronics manufacturing; however, several issues have come to light when using them to protect LED products.
First, liquid coatings are often uneven and, thus, may have voids. These voids are pathways for moisture to get through to circuit boards and cause performance failure of the LEDs. These failures can be expensive when considering the large number of LED boards used in Digital display and video signage, such as those used for sports venues and large billboards along the highways and in the city centers.
Over the long-term, none of the liquid coatings or compounds can hold up to prolonged exposure to UV light. For some LED applications this may not be an issue, but obviously many types of LED boards are exposed to UV light on a continual basis And the coating must protect the board in these applications. UV exposure can damage a board fairly quickly and the cost to do continual maintenance on such LED displays, transit signage, etc. can quickly add up.
The Parylene alternative
An alternative to common industry coating materials is Parylene conformal coatings. With several variants, including a new high temperature and UV stable variant, Parylene offers a coating alternative that is extremely thin and perfectly conformal, and provides long-term protection for the full product life — regardless of the size or complexity of the end product.
The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The powdered raw material, known as “dimerâ€, is placed in the vaporizer. The vapor is then transferred to an ambient temperature chamber where it spontaneously polymerizes onto the parts. The vapor is then transferred into an ambient temperature chamber where it spontaneously polymerizes onto the parts The singularity of catalysts or plasticizers are used in the coating process. The Parylene process is carried out in a closed system under a controlled vacuum, with the deposition chamber remaining at room temperature throughout the process.
Because there is no liquid phase in this deposition process, there are no subsequent meniscus, pooling or bridging effects as seen in the application of liquid coatings, thus dielectric properties are never compromised. The molecular "growth" of Parylene coatings also support not only an Even, conformal coating at the thickness specified by the manufacturer, but because Parylene is formed from a gas, it also penetrates into every crevice, regardless of how seemingly inaccessible. This ensures complete encapsulation of the substrate without bridging small openings.
A few of the key benefits of Parylene coatings include: UV stability: Unlike other conformal coating formulations, Parylene provides measurable protection from degradation and discoloration from ultraviolet light exposure. Parylene coatings are stable at operating temperatures up to 350°C and can also withstand short-term exposures to 450° C. Moisture resistance: Parylene coatings provide excellent moisture barrier properties to protect components from failures due to moisture, fluid and chemical exposure. Smallest molecular structure: The extremely small molecular size of Parylene allows it to ingress deep into open areas on the top or bottom of any package, regardless of the size or complexity of integrated devices. Lowest dielectric constant and dissipation factor: Parylene has an extremely low Dielectric constant and dissipation factor, enabling it to provide small, tigh It has been demonstrated that the voltage breakdown per unit thickness increases with decreasing Parylene film thickness.
Parylene supports the future
LEDs consume up to 80% less energy than traditional incandescent lights and 50% less than fluorescent lighting, without the mercury waste disposal hazard issues faced with current compact fluorescent lamps. The ecological benefits, making them ideal for all types of lighting replacements, from industrial and municipal to residential and within all types of consumer devices.
Protecting these gems of lighting power will become a growing issue as the roadmap for their use continues to expand. Parylene coatings can benefit LED applications in the automotive, aerospace, electronics and military industries — wherever LED assemblies require protection from high temperatures and UV exposure. For large display signage, where electrical failures, moisture ingress and UV damage are common occurrences, the ability of Parylene to completely coat underneath, around and between the smallest crevices, devices and wiring, without affecting the light emitting from the LEDs, offers both time And cost savings in repair and maintenance.
Parylene conformal coatings provide unsurpassed protection for many LED applications today, ensuring high reliability and longer life for customer end products, such reducing overall cost of maintenance, repair and replacement. About the Author Alan Hardy is the automotive, electronics & military market manager for Specialty Coating Systems .
High Quality Rectifier Diode with Competitive Price, Fast Shipping, Order Now.Years of experience.
The company has domestic advanced diode production equipment, complete testing methods and quality assurance system.
Advanced Technology.Electronic component diodes are widely used in household appliances, green lighting, network communications, power chargers, automotive electronics and other fields.
Rectifier Diode,diode Bridge Rectifier,KBU Bridge Rectifiers,rectifier diode,Fast rectifier diode
Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com