The Mitsubishi FX1S series PLC is suitable for the smallest package, and it is the preferred target for users who want low cost to seek powerful control within the limited I/O range. The FX1S provides up to 30 I/O points and can transmit data via serial communication. The MT model also has positioning capabilities and is widely used in various small mechanical devices.
FX1S also has the following features:
Positioning and pulse output functions: Each phase in a PLC unit can output 2 100KHz pulses at the same time. The PLC is equipped with seven special positioning instructions, including zero return, absolute or relative address expression and special pulse output control.
Can realize analog input and output through FX1N-2AD-BD, FX1N-1DA-BD; Can install display module FX1N-5DM, can monitor and edit timer, counter and data register;
Network and data communication functions:
Communication boards can be connected: FX1N-232-BD, FX1N-485-BD, FX1N-422-BD.
Mitsubishi FX1S series PLC main features:
1ã€Integrated programmable controller
The power supply, CPU, memory, and input/output are combined to form a single-cell programmable controller. At the same time, a DC 24V power supply for sensors is built into the AC power supply DC input type.
2, input and output up to 30 points
Total number of input and output points is 10/14/20/30 points, a total of 4 types (input/output expansion unit or extension module cannot be added)
3, built-in RUN / STOP switch
RUN/STOP can be performed with the built-in switch.
At the same time, the RUN/STOP instruction can also be issued from a peripheral device or a normal input terminal.
4, built-in analog potentiometer
Built-in two analog potentials for adjusting timer setting time.
If you install the FX1N-8AV-BD analog potentiometer option, it can be added to 10 units.
5, program memory
According to the standard, built-in 2K step EEPROM (without battery).
You can also use the option FX1N-EEPROM-8L type storage box (8K step built-in, FX1S can use 2K steps) to read/write programs.
6, the clock function
Built-in clock function for time control.
If you install the FX1N-5DM display module, you can easily display and set the time.
7, FX GM, A/QnA/Q/FX series of general peripheral equipment.
Peripheral devices shared by the FX series can be used.
At the same time, there are also Windows version programming software that can program A/QnA/Q/FX series.
**Remark** When the peripheral device does not correspond to the FX1S, if the corresponding FX2 peripheral device is selected, the usable portion is limited to the memory and software components of the FX1S.
8, corresponds to write in RUN
Using computer software can change the program while the programmable controller is RUN.
Aluminum Cable Tray
Good quality aluminum cable tray is a type of cable management system that is used to support and organize cables and wires in various industrial and commercial settings. It is made of high-quality aluminum material that is lightweight, durable, and corrosion-resistant, making it an ideal choice for harsh and corrosive environments.
The aluminum cable tray is designed to provide a safe and secure pathway for cables and wires, preventing them from getting tangled or damaged. It can be easily installed on walls, ceilings, and floors, and can be customized to fit specific requirements and applications.
One of the key advantages of using aluminum cable tray is its versatility. It can be used in a wide range of industries, including power generation, telecommunications, data centers, and transportation. It can also be used in various applications, such as indoor and outdoor installations, high and low voltage applications, and hazardous locations.
Aluminum Cable Tray,Aluminium Cable Tray,Aluminum Alloy Cable Trunking,Aluminum Alloy Cable Ladder
Rayhot Technology Group Co.,Ltd , https://www.cnrayhot.com