Lamp installation precautions
1. The installation should be carried out by an electrician, and the electrician must be certified to work;
2. Before installation, it must be determined that all the wire boxes, switches and sockets are installed firmly and correctly;
3. Heavy-duty lamps and fans are strictly prohibited from being directly installed on the keel of the ceiling project;
4. Its model, rated voltage, rated power, etc. should be consistent with the design parameters;
5. The shape of modern lamps is antique, innovative and practical. No matter how it is matched, the shape of these three types of lamps should be pursued as much as possible in the overall selection;
6. The family with the living room can use some fashionable lamps in the living room, such as trigeminal chandeliers, floral wall lamps, multi-section rotating floor lamps and so on. Households with tight housing should not be equipped with too fashionable lamps, which will increase the crowded feeling. It is not suitable to install chandeliers in rooms with a height less than 2.8m.
7. Color should obey the color design of the whole room, be sure to pay attention to the color of the lampshade and the outer shell and the color coordination of the wall, furniture and curtains.
LC1-F AC Contactor(Our own model is BC1-F series AC Contactor) ,it is used in rated voltage 380V AC 50Hz/60Hz,allocated special with coil,which can be used in ciruit of 40-400Hz,the control coil voltage(AC coil operation) can up to 660V,rated current up to 800A electric circuits.
LC1-F AC Contactor is mainy used for remoting making&breaking circuits,also for frequency staring or controlling motor,protect circuit from over-load when assembling with thermal over-load relay.It can unify the general electrical equipment,motor and circuit,the auxiliary contact group,Air time-delay head,Mechanical interlock contactor and star-triangle starter.
Electrical Magnetic Contactor,Electrical Ac Contactor DC Contactor,Industrial Controls AC Magnetic Contactor,AC Magnetic Contactor
Ningbo Bond Industrial Electric Co., Ltd. , https://www.bondelectro.com