Heat pipe technology cools LED lights for stable lighting

According to Reuters the British inventor James - the son of Jack Dyson - Dyson has announced the results of his research: the LED lighting cooled by heat pipe technology, allowing them to achieve more sustainable, stable and lighting effects .

The technology is said to have cost Jack Dyson and the team of engineers behind him for ten years. Previously, heat pipe cooling technology was mainly used in satellite and processor heat dissipation, and no one ever thought about using it in the field of civil lighting. The CSYS desk lamp with this technology has built in 8 high-power LED lamp beads with 8mm spacing, and can achieve 8mm dense arrangement, so the illuminance of 648LUX is output in 1 square meter space (about ordinary white woven lamp). Several times the parameters, and has a continuous high brightness output life of 144,000 hours.

It is understood that the basic principle of this technology is to set a vacuum sealed copper tube in the lighting lamp along the horizontal lamp holder. Seal a drop of water in each sealed copper tube. After turning on the light, the heat generated by the LED causes the water in the tube to become steam, and under the pressure difference, the steam begins to move along the tube. Once the steam reaches the cooling zone of the copper tube, it will recondense and return to the water, so that the heat energy is dissipated. Then, the water is sucked back into the LED direction, and the cooling cycle of the LED then starts again.

Although LED illuminating particles are greatly reduced compared to conventional lighting fixtures, some high-brightness models still produce higher operating temperatures, which have a significant impact on longevity. In general, LED lighting fixtures use more traditional passive metal heat sinks. Although there is no problem in dealing with general brightness, if you want to use high-brightness and ultra-high brightness LED devices, the heat dissipation effect is not guaranteed.

Editor: Yan Zhixiang

15 Inch POS

It is a terminal reader equipped with barcode or OCR code technology, with cash or barter limit cashier function. Its main task is to provide data services and management functions for commodity and media transactions, as well as non-cash settlement. POS is a multi-function terminal. It can be installed in the special merchants and acceptance outlets of credit cards to form a network with the computer, and the automatic transfer of electronic funds can be realized. It has the functions of supporting consumption, pre-authorization, balance inquiry and transfer. Safe, fast and reliable. It is difficult to obtain basic business information in bulk transactions. The introduction of the POS system is mainly to solve the blind spot of information management in the retail industry. An important part of the chain store management information system.

15 Inch Pos,Mobile Pos Machine,Pos Swipe Machine,Debit Card Swipe Machine

ShengXiaoBang(GZ) Material Union Technology Co.Ltd , https://www.sxbgz.com