Analysis of quality problems of LED display components
The production and installation technology of LED display has a great influence on the quality of the display. From the selection of production materials to the processing to the finished product, every link needs to be strictly checked and refined to each step. In addition, the LED display should be regularly inspected and maintained during the use of the LED display. If quality problems are found, remedial measures should be taken in a timely manner.
Analysis of electrostatic problems
In the process of LED display production and installation, static electricity has a great impact on the quality of the LED display. However, many LED display production and installation companies only know
The importance of welding LED display links to static control, static control for lack of awareness of the importance of other sectors. In the northern region, the winter climate is cold and dry, the static voltage is very high, static electricity will destroy the LED display circuit , resulting in circuit damage, LED display performance and service life will be affected to varying degrees. Therefore, in the process of LED display production and installation, we must pay attention to anti-static control to avoid damage to the LED display.
Analysis of welding link control problems
There are also many quality problems in the process of LED display soldering, which are mainly reflected in the following points: First, the enterprise's static prevention and control management is not in place, and second , the temperature and air humidity control of the LED display application is unreasonable, and the third is LED. The welding time of the display components is not well controlled. Fourth, there are quality problems in the welding materials. Fifth, the welding personnel do not have the
Professional welding technology, low professional level. Many welding companies do not have professional welding personnel, and the mobility of personnel is relatively large, resulting in lack of technical support for LED display welding. After the LED display is used for a period of time, the brightness of the display will become low. The reason for this phenomenon is that the welder does not have reasonable control over the welding time and temperature, resulting in fog in the LED display, which in turn affects the brightness of the display. Therefore, in order to ensure the quality of LED display screens and to properly control welding problems, welding companies must strengthen personnel training and continuously improve the professional level and comprehensive quality of welding personnel. In addition, the welding company can set up a reward mechanism inside the welding personnel, give certain material rewards or spiritual rewards to the employees with excellent performance, and improve the enthusiasm and enthusiasm of the welding personnel.
Bang Xxl,Bang Xxl Vape,Disposable Vape Bang Xxl,Vape Pen Bang Xxl
Nanning Nuoxin Technology Co., LTD , https://www.nx-vapes.com