Kang Yu Medical Bone Density Analyzer - Analysis of bone content, providing dietary guidance - Database & Sql Blog Articles

Clinical Value

★Applicable to the following children's nutritional deficiency and disease detection, auxiliary diagnosis, cause analysis and treatment observation, including calcium deficiency, vitamin D deficiency, vitamin K deficiency, zinc deficiency, vitamin C deficiency, vitamin A deficiency , precocious puberty, delayed sexual development, lead, cadmium and VD poisoning, growth hormone (GH) deficiency. These diseases and unhealthy conditions can cause bone dysplasia and bone mineral deficiency, which can be found through bone density examination, and can be analyzed by treatment to analyze the cause and improve the preventive and therapeutic effect.

★ The bone density of pregnant women will change significantly during pregnancy and lactation, which is a special population that needs to be tested for bone density. The change of bone mineral density during pregnancy and lactation is due to the large amount of calcium required for the growth and development of the fetus and the baby. If there is no corresponding increase in calcium intake, the bone calcium is dissolved in a large amount, resulting in calcium deficiency in pregnant women and lactating mothers. Because of the non-radiation, the ultrasonic bone density is used as a staged observation of the dynamic changes of bone mineral density during pregnancy and lactation. It is an indispensable means of diagnosis and treatment for guiding nutritional supplements and preventing fetal and infant calcium deficiency and osteoporosis of pregnant women and lactating mothers. Osteoporosis occurs after menopause, and slowing down and slowing down its development is an important part of maternity insurance. Bone mineral density testing is an indispensable means of diagnosis and treatment.

★ Because of the special constitution, the elderly are prone to calcium loss, leading to osteoporosis. About one-third of people over the age of 60 in China suffer from varying degrees of osteoporosis. Therefore, regardless of whether the elderly have suffered from osteoporosis, regular bone density checks should be performed to prompt calcium supplementation as needed.

The role of bone density analysis:

1. Detect bone mineral content, assist in the diagnosis of nutrient deficiency such as calcium, and guide nutrition intervention and treatment;

2. Predict bone nutrient status and growth rate according to age-related bone density;

3. The diagnosis doctor of osteoporosis uses bone density measurement to determine whether the patient has osteoporosis.

4, fracture risk assessment Bone mineral density (BMD) can predict the risk of fracture, scientific analysis of how likely you are to have a fracture, so you can do it.

★ Bone density meter is a medical testing instrument for measuring human bone minerals and obtaining various relevant data.

★It can be used in functional departments, orthopedics, endocrinology, gynecology, pediatrics, rehabilitation, geriatrics, physical examination centers, physical fitness and medical research units at all levels of hospitals to provide diagnosis and auxiliary diagnosis for bone diseases, and to carry out fracture risks. Predictive assessment, testing for the treatment of bone diseases, its application will effectively improve the hospital's medical level.

Bone density analyzer

Program overview:

Ultrasonic Bone Density Analyzer manages the health data of the subjects through the magnetic card file system. With reference to a comprehensive database, physical development assessment, bone density analysis, dietary intake analysis, food exchange guidance, and dietary nutrition therapy improvement guidance Program.

Application scenario:

Children's Health Section of the Maternal and Child Health Care Center, Children's Hospital, Pediatrics of General Hospital, and Child Medical Center.

Ultrasonic bone density meter

_Luxury

1,

Cart integrated design, the instrument can be flexibly pushed forward and backward, improving the efficiency of medical staff

2,

The card swiping system can be used to identify card cards, such as ordinary IC cards and ID cards, and can set the magnetic card to realize the classification management of the magnetic card timing and counting.

3,

Display: image input system, refer to the picture to more vividly and more accurately determine the intake;

Recipe entry interface - covers seven food pictures, accurate image, easy to select and accurately determine the intake;

Nutritional Guidance Screen--Displays the Dietary Nutrition Guidance Report, which includes the weight of grains, meat, fruits and vegetables, and their representative foods for early, middle and dinner intake.

4,

Convenient recipes and catering functions: Provide a reasonable dietary nutrition guidance program based on the Chinese Nutrition Society's Reference Dietary Nutritional Intakes for Chinese Residents and the China Food Ingredients Table issued by the Chinese Center for Disease Control and Prevention.

5,

Can issue bone density analysis report form, dietary nutrition analysis report form, food exchange report form, recommended recipe report form, physical development evaluation report form

6,

Convenient recipes and catering functions: Clinical dietary nutrition recipes automatically calculate food ingredient content, and dietary nutrient rations automatically calculate food ingredient content

7,

The data query system provides various query methods such as telephone numbers, micro signals, and numbers for the user to query past data.

8,

Measured value: Ultrasound measurement of bone sound velocity (SOS), non-invasive, no radiation

9,

Probe: The main frequency sound frequency of the product is 0.5MHZ

10.

Measurement Accuracy & Accuracy: Anthropometric accuracy is RMS CV=0.35±0.05, probe accuracy ≤0.25%

11,

Measurement time: single detection time is 40 seconds ± 2 seconds

12.

Man-machine interface: mouse and keyboard

13,

Display device: LCD display

14,

Safety standards: GB9706.1, GB9706.9, GB9706.15

15,

Power supply: AC 220±22V 50Hz±1Hz

16,

Input power: 180VA

17,

Humidity: 30% to 85% Non-condensing, operating environment: Temperature: Celsius +5 to +40 degrees

18.

Storage and transportation conditions: temperature stored at -25 ~ +50 ° C, humidity is not more than 90%, no corrosive gas and well ventilated room

19.

Safety classification: Class I BF type

20,

Host volume: length, width, height, 730mm * 580mm * 900mm

twenty one,

Host weight: ≤ 30kg

twenty two,

Printing device: built-in printer

twenty three,

Waterproof splash protection type: The type of probe anti-injection is: IP*7

twenty four,

Disinfection or sterilization method: the probe surface can be routinely disinfected within 5mm downward.

25,

Operation category: continuous operation

26.

Ability to predict bone age in 0-20 year olds

27.

Predictable height of children, boys need to be 10 years old, girls need after menarche

28.

Adult examination: relative fracture risk RRF and pre-fracture age EOA

Meal detection module

1, magnetic card file management system: wearable card reader, able to identify, ordinary

IC

card,

ID

Cards and other magnetic cards, and can be set on the magnetic card to realize the classification management of the magnetic card timing, counting, etc.; and provide a query system according to the magnetic card for the user to query the past data.

2, physical development assessment system: the same age body measurement data as a standard, to assess the level of individual or group physical growth and its deviation from the standard value, to find risk factors, take interventions.

3. Dietary Intake Assessment System: Establish a comprehensive database based on the latest edition of the Chinese Nutrition Society's “Reference Intakes for Dietary Nutrients in Chinese Residents” and the China Center for Disease Control and Prevention.

4. Recommended recipes and dietary development platform: Appropriate recipes can be developed according to standards, growth and development, and disease intervention programs. The system uses the WYSIWYG design concept to make the development recipes scientific and convenient, more suitable for special needs and different eating habits. Recipe development for the crowd.

The four national standards come from: the General Office of the State Council, the State Health Planning Commission, the Chinese Nutrition Society, and the Chinese Center for Disease Control and Prevention.

Output report

1 bone density analysis report

2 Nutrition Assessment Report

3 food exchange report

4 recommended recipe report

5 physical development report

Ultrasonic bone density meter

_{Popular type}

1,

Measurements:

Ultrasound measurement of bone sound velocity (

SOS, no trauma, no radiation

2. Probe: The main frequency sound frequency of the product is: 0.5MHZ

3,

Measurement accuracy

& precision

:

Anthropometric accuracy

RMS CV=0.35 to ±0.05

;

Probe accuracy

≦0.25%

4,

measure time:

The single detection time is

40 seconds ± 2 seconds

5,

Man-machine interface: mouse and keyboard

6,

Display device: LCD display

7,

safety standard:

GB9706.1, GB9706.9, GB9706.15

8,

using electric:

AC 220

±

22V 50Hz

±

1Hz

9,

input power:

180VA

10.

humidity:

30% to 85% non-condensing

, operating environment:

Temperature: Celsius

+5 to +40 degrees

11,

Storage and transportation conditions:

Temperature stored at temperature

—25~+50°C

,

Humidity is not greater than

90%, non-corrosive gas and well ventilated room

Inside

12.

Security classification:

Class I BF

13,

Host volume:

long,

width

,

high:

590mm X 470mm X 900mm

14,

Host weight:

≤ 25kg

15,

Printing device

: external

printer

16,

Waterproof splash protection type:

The type of probe anti-injection is:

IP*7

17,

Disinfection or sterilization method:

Probe surface down

5mm can be used for routine disinfection of probes

18.

Operation category: continuous operation

Ultrasonic bone density meter

_Portable

1,

Advanced portable integrated all-digital integration technology, small size, light weight, easy to carry

2,

Measured value: ultrasonic measurement of bone sound velocity (

SOS), non-invasive, no radiation

3,

Probe: The main frequency sound frequency of the product is

0.5MHZ

4,

Measurement accuracy

& Accuracy: Anthropometric accuracy is RMS CV=0.35±0.05, probe accuracy ≤0.25%

5,

Measurement time: The single detection time is

40 seconds ± 2 seconds

6,

Man-machine interface: mouse and keyboard

7,

Display device: LCD flat panel monitor (

LED)

8,

safety standard:

GB9706.1, GB9706.9, GB9706.15

9,

using electric:

AC 220±22V 50Hz±1Hz

10.

input power:

180VA

11,

humidity:

30% to 85% non-condensing, operating environment: temperature: +5 to +40 degrees Celsius

12.

Storage and transportation conditions: temperature stored at temperature

-25~+50°C, humidity not more than 90%, no corrosive gas and well ventilated indoor

13,

Security classification:

Class I BF

14,

Host volume: long

,

width

,

high

:425mm*365mm*180mm

15,

Host weight:

≤ 11.5kg

16,

Printing device: external printer

17,

Waterproof splash protection type: The type of probe anti-injection is:

IP*7

18.

Disinfection or sterilization method: the probe surface is down

5mm can be used for routine disinfection of probes

19.

Operation category: continuous operation

Bone Density Analyzer: http://

Test code: hjdfwe23ss