How to make a simple magnetic stirrer?

Below we will explain the production method in detail for you step by step.

This is what a magnetic stirrer looks like. Put the liquid in the beaker on it and it will stir automatically after power on.

How to make a simple magnetic stirrer?

The principle of this device is very simple. It is a motor that drives a magnet to rotate. A magnetic stirring rod is placed in the liquid in the beaker, and the stirring rod rotates with the magnet underneath to stir.

How to make a simple magnetic stirrer?

A bench drill is used to drill the bracket, and a screw rod is inserted into the hole to fix the bracket.

How to make a simple magnetic stirrer?

The motor is on an unused CD player.

How to make a simple magnetic stirrer?

It is a similar small electric motor.

How to make a simple magnetic stirrer?

The round hole containing the motor is drilled with a flat drill, and this kind of drill is used to drill large holes.

How to make a simple magnetic stirrer?

The square slot that accommodates the switch and the small power socket is first drilled with a drill bit and then trimmed with a chisel. This foreigner doesn't have a milling cutter, otherwise he can mill out the groove directly.

How to make a simple magnetic stirrer?

The small power socket he used was an audio socket removed from an old CD player.

How to make a simple magnetic stirrer?

The DC power supply he used was also welded with audio plugs to match the sockets used above. Note that this is not a special power plug.

How to make a simple magnetic stirrer?

The magnet was removed from the used hard drive.

How to make a simple magnetic stirrer?

The black stuff in his hand is the stirring rod. Because the stirring rod is often put into the chemical liquid, it is not a simple iron rod, but is wrapped with Teflon plastic.

How to make a simple magnetic stirrer?

This kind of small-opening flask requires high-speed stirring for chemical reactions, and this kind of electromagnetic stirrer is very suitable.

How to make a simple magnetic stirrer?

DIN Cables

There are many different versions of DIN Connectors. The name of each type comes from the number of pins the connector has (3-pin DIN, 4-pin DIN, etc.) Some of these pin numbers come in different configurations, with the pins arranged differently from one configuration to the next.

DIN cable connector 3-pin, 4-pin, 5-pin, 6-pin, 7-pin, 8-pin degree 180, 216, 240, 262, 270

DIN cables, DIN connector, telephone cable, computer cable, audio cable

ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com