Stone ROM (millet box 1s) Brush tutorial
statement
This tutorial is applicable to the millet box 1S (Millet Box Standard Edition, MDZ-06-AA) and the adapted millet system version is 1.3.88 and above.
Foreword
This tutorial is divided into two parts: ROOT and Brush. The ROOT box can skip the ROOT tutorial and start the brush directly.
Ready to work
(1) Millet box 1s one (2) MicroUSB data line one: used to connect the box and PC;
(3) One PC: It is recommended to use a laptop so that the box can connect to the PC while using HDMI to connect the TV;
(4) Display/TV: Used to display and debug the box.
(5) 360 one-click root computer version (6) Brush tool (7) Brush package
reset
Use the remote control to operate the millet box, enter the “millet box settingâ€, and select “restore factory settings†in “Aboutâ€.
ROOT
1-1 Install 360 one-button ROOT on the computer.
1-2 temporarily shut down the PC on the anti-virus software, computer housekeeper, mobile assistant and other software.
1-3 Use the remote control to operate the millet box, enter the "millet box settings", "Accounting and Security", set the "ADB debugging" option to "Allow".
1-4 Connect the box to the computer via the microUSB cable, and connect the box to the monitor or TV to display the contents of the box.
1-5 When the PC is connected to the box for the first time, "Allow USB debugging?" will appear on the TV. Use the remote control to check “Always Allowed†and click OK.
1-6 Open the 360 ​​one-button ROOT, 360 one-button ROOT will install the ROOT tool to the box, use the remote control to agree to install.
1-7 Click "Start Safe ROOT".
Brush machine
2-1 Extract the Brush Toolkit
2-2 Copy the Brush Package update.zip to the Brush Tool's Directory
2-3 Double-click to open "Start Brush.bat" in the toolkit
2-4 When the following screen appears on the box, it indicates that the flashing machine has started
2-5 Brush Finish
This tutorial is applicable to the millet box 1S (Millet Box Standard Edition, MDZ-06-AA) and the adapted millet system version is 1.3.88 and above.
Foreword
This tutorial is divided into two parts: ROOT and Brush. The ROOT box can skip the ROOT tutorial and start the brush directly.
Ready to work
(1) Millet box 1s one (2) MicroUSB data line one: used to connect the box and PC;
(3) One PC: It is recommended to use a laptop so that the box can connect to the PC while using HDMI to connect the TV;
(4) Display/TV: Used to display and debug the box.
(5) 360 one-click root computer version (6) Brush tool (7) Brush package
reset
Use the remote control to operate the millet box, enter the “millet box settingâ€, and select “restore factory settings†in “Aboutâ€.
1-1 Install 360 one-button ROOT on the computer.
1-2 temporarily shut down the PC on the anti-virus software, computer housekeeper, mobile assistant and other software.
1-3 Use the remote control to operate the millet box, enter the "millet box settings", "Accounting and Security", set the "ADB debugging" option to "Allow".
1-5 When the PC is connected to the box for the first time, "Allow USB debugging?" will appear on the TV. Use the remote control to check “Always Allowed†and click OK.
Friendly reminder: ROOT may fail, please try several times after restoring factory settings
Brush machine
2-1 Extract the Brush Toolkit
2-2 Copy the Brush Package update.zip to the Brush Tool's Directory
Electric Logistics Vehicle Battery Supply
battery supply
Shenzhen Zhifu New Energy Co., Ltd. , https://www.sunbeambattery.com