Box connection wifi often disconnected off how to do?

Many users have encountered the problem of frequent disconnection and disconnection of the wifi link on the box. Various types of answers are found. Today, Xiao Bian sums up all the problems here, and he will not regret it for life.
Once suspected as a system problem, restoring the factory settings to the previous system has not been tried.

It was suspected that the box was poorly cooled, causing WiFi problems. A number of cooling holes were drilled into the box and the problem was not resolved.

There was a suspicion that it was a cat problem, but surfing the Internet with a mobile phone was not unusual...

Here I share with myself the solutions that I discovered by chance:

Once the box is dropped, other mobile computers will be temporarily unable to connect. The quickest way is to restart the router, because a new router of the same model has been replaced, and it never occurred that the problem would appear on the router. So we looked at a large number of network stickers and learned that there are differences in router performance. Routers with low performance may experience a crash and slow response due to unsatisfactory performance when encountering boxes. This unprecedented number of routers on the market Generally only 200MHz chip, 4MB flash memory, compared with a meter router 580MHz, 16MB flash memory performance data, instantly made a 129 yuan to buy a certain meter router's decision, but somehow Mi even routers do not have the spot.

Determine that the router performance does not keep up with the crash. The evidence is that when you use the box to enter the router settings page, the response is very slow. The solution is to replace the high-performance router or reduce the routing burden through settings, such as turning off the upnp function.

The specific method is as follows:

(Take TP-link as an example. If there is a router vendor driver software update, please upgrade it first.)

The computer browser enters the router setup page (usually 192.168.1.1, some 192.168.1.253) and the forwarding rule -upnp is set to off.

(Turn off the upnp will be able to solve the problem almost, if the impact of p2p download can be changed back, watching television does not have a significant impact on the speed, watching the one-time television temporarily broke the network)



Other advanced settings: (You can choose some to set performance, some settings need to restart the router

1. When the DHCP is enabled, the address lease is adjusted to 600 minutes (120 minutes by default) to avoid disconnection due to renewed leases.

2. Bind fixed ip, copy the MAC address in the client list, add the specified ip address in the static address assignment, and use any address within the range of the DHCP service address pool (here 192.168.1.100~192.168.1.199);

3. In the wireless setting, the recommended channel is set to 1 or 11 (the middle channel is the most blocked, and the Android phone can be installed to view the WiFi analyzer). If there is no other WiFi signal around the bandwidth, 40MHz can be set. If there are many peripheral signals, only 20MHz can be set.

4. The SSID broadcast is not checked, ie, the name of the WiFi signal is hidden, and other devices (such as the SSID network name added manually) must be selected when connecting the device such as a mobile phone and a box.







Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, etc. on TV boxes, smart TVs, smart TV software, etc. Answering questions.

Wall AP Wireless AP

What is an wall ap? In life, many times we will encounter a bad network situation, generally when the network is bad will affect everyone's mood, everyone likes the situation of network unobstructed, so will go to find a way to keep the network smooth, and wall ap can help you keep the network unobstructed, let's take a look.
1. wall ap
What is the wall ap is a lot of people want to know the problem, wall ap can let everyone's network has been smooth, wall ap is the most important part of the networking, wall ap and the socket at home, you can transmit signals through the wall ap, but want to really use the wall ap you need to install some network cables in each room in advance.
In other words, the wall ap can be directly called a Wireless Router, the wall ap can be used as the antenna of the router, if you put the wall ap in the room, then the signal in the room will be strengthened, but now people prefer the wireless router, so the wall ap also needs POE and AC two devices to assist.
2. AC
AC machine is the most common kind of router, it is very different from ordinary router, can not be used by simple insertion, but need to be set up several times to connect to the network, but also need to be combined with the wall ap to be better used, so the wall ap is very important. The combination of router and wall ap can enhance the network signal.
3. ap networking scheme
The ap networking scheme not only requires the wall ap, but also needs to add the control system, you can choose commercial, you can also choose home, for the network signal requirements of relatively high enterprises can choose commercial, before choosing the networking mode need to be carefully considered.

Wall Ap Wireless Ap,Wall Mount Access Point,Wall Mount Wifi Access Point,Access Point Ac In-Wall

Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommtech.com