13-inch new MacBook Pro disassembled, Touch Bar is very fragile

On November 17th, foreign media reported that the dismantling team iFixit released the dismantling map of the new MacBook Pro 13-inch Touch Bar, and said that Apple’s new Touch Bar is a very fragile and difficult to repair configuration. .

TouchBar is very fragile! 13-inch new MacbookPro dismantling

13-inch new MacbookPro dismantling (picture from Sina)

iFixit said that compared to the previous MacBook Pro, this year's new MacBook Pro product is more difficult to disassemble, in addition to the need to screw down the bottom shell, you need to carefully remove the back shell. The design inside the fuselage is very compact, but it is not completely repairable.

The disassembly also found that the Touch Bar is very easy to damage. It is very difficult to separate the OLED from the upper casing, and the Touch Bar is very fragile. During the disassembly process, the internal layout of the disassembled discovery component has been redesigned, and Apple has added a new connector to the Touch Bar version of the MacBook Pro, but no components are connected.

13-inch new MacbookPro dismantling (picture from Sina)

According to earlier news, the Touch Bar touch bar on the new MacBook Pro uses the Samsung OLED panel. The panel is a rigid OLED panel produced by the A2 line of Samsung Display.

There is also an interesting detail in the teardown process. The speaker is not under the speaker opening. The sound of the speaker is emitted through the side vents. The speaker opening of the Touch Bar version of the MacBook Pro is only used for decoration.

Finally, according to the iFixit convention, the difficulty of repairing digital equipment is scored. Unsurprisingly, the 13-inch Touch Bar version of the Macbook Pro has a fixability score of 1 point, which means it is extremely difficult to fix.

Amorphous Ribbon

Anyang Kayo Amorphous Technology Co.,Ltd is located on the ancient city-Anyang. It was founded in 2011 that specializes in producing the magnetic ring of amorphous nanocrystalline and pays attention to scientific research highly,matches manufacture correspondingly and sets the design,development,production and sale in a body.Our major product is the magnetic ring of amorphous nanocrystalline and current transformer which is applied to the communication, home appliances, electric power, automobile and new energy extensively. We are highly praised by our customers for our good quality,high efficiency,excellent scheme,low cost and perfect sale service.

Fe-based amorphous Ribbon is an ultra-fine grain structure that has high permeability,high saturation magnetic induction,low loss and excelent stability. It can satisfy the requests of electronical products which is high frequency,large current,small volume and energy-saving.Especially it can replace the silicon steel,permalloy and ferrite and be used to all kinds of electronical products widely.

Amorphous Ribbon,Fe-Based Amorphous Ribbon,Low-Cost Amorphous Ribbon,Custom Fe-Based Amorphous Ribbon

Anyang Kayo Amorphous Technology Co.,Ltd. , https://www.kayoamotech.com