Foreword: I have been playing computer for 20 years, but I have always been holding the idea that the assembly of the computer is bigger and better. The motherboard should be able to dissipate heat and improve the interface. It is also better to have more expansion. The graphics card must be able to dissipate heat, and the chassis must be well expanded. So it has always been like to use a big chassis for yourself and others. However, in the aunt here to see everyone drying the sun drying the host is also a small chassis. I also think that some old parts can be grouped into a small computer in the living room to organize a HTPC, whim to think of the entire small chassis. Since Cao Cao's small chassis simply buys the smallest one, putting the living room too ugly will not work. Studying for a long time to find the most suitable is also the silkworm, as good as him without him cheap, and he is not as cheap as he did not look good, not entangled, and direct JD under a single C2.
Not much to say, Jingdong's logistics is second to none, directly out of the box
Looks like it's original, but I'm not even if Virgo is second-hand. It doesn't matter if it's secondhand.
The square box is very good
The silvery aluminum shell feels good, the style is decent, and you don't lose the price in the living room.
Look at the details of each place, the front of the drawing process
Switch interface is on the side of the chassis
The back of the list
Large radiating hole at the bottom
The expansion slot here is a hand-tightening screw. Shiny
From another point of view, by the way, you can look at the thickness of aluminum plate, work is really good
Spare screws and chassis feet
Instructions are also useless
There are too many chassis installed, C2 is particularly good demolition
The accessories that are on hand are all old guys, but with the HTPC exactly, G1840, 4G, the first SSD I started, Yeston's h81.
Vp350
The chassis is small, first put the motherboard into it
Hard drive is still here
C2 is really small, plus the size of the power supply, this line of chaos, simple bundle, do not engage in any take the place, the aluminum chassis is too thin edge, easy to scratch, until now 0 damage will not clear, and avoid In order to trace the perfect blood out of trouble
The work was perfect. Most of the people who read the comments were scratched by the chassis. I took care of the assembly and it was not an accident.
Summarize it simply: There is also a lot of goods on the forum, and I don't describe it in detail. I talk about it. The board of the chassis is not as unpleasant as many valued friends say. Of course, it may be that the aluminum chassis I use is relatively small. Anyway, I think this kind of thickness is more appropriate and the thickness is heavier. This kind of thickness is very good in my hand. And the positioning of this cargo is not the same kind of bearing, it is not used to install iron, this small chassis mounted accessories are small, no need to entanglement thickness. The appearance looks good and the brushed style looks full of upscale. The price is considered to be one of the lowest chassis for the aluminum chassis. The face value is the highest. It should be said that this price and the C2 competition is the establishment of the D5, but I think the C2 is a good thing, and C2 is cheaper. Point, plus JD can also 99-20. Personally feel that this cargo is worth it
Residual Current Circuit Breaker With Over Load Protection
TWO FUNCTION : MCB AND RCCB FUNCTIONS
leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage.
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.
RCBO,ELCB,Leakage Circuit Breaker,Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com