The screw shell in the dojo field, the first try a small aluminum chassis - JONSBO Qiao Sibo c2 out of the box experience

Foreword: I have been playing computer for 20 years, but I have always been holding the idea that the assembly of the computer is bigger and better. The motherboard should be able to dissipate heat and improve the interface. It is also better to have more expansion. The graphics card must be able to dissipate heat, and the chassis must be well expanded. So it has always been like to use a big chassis for yourself and others. However, in the aunt here to see everyone drying the sun drying the host is also a small chassis. I also think that some old parts can be grouped into a small computer in the living room to organize a HTPC, whim to think of the entire small chassis. Since Cao Cao's small chassis simply buys the smallest one, putting the living room too ugly will not work. Studying for a long time to find the most suitable is also the silkworm, as good as him without him cheap, and he is not as cheap as he did not look good, not entangled, and direct JD under a single C2.

JONSBO C2 silver MINI chassis (supports 24.5*21.5CM size motherboard / aluminum chassis / ATX power supply / 80MM high radiator) 169 yuan square, streamlined, study the living room, low-key luxury Jingdong direct link to Wikipedia

Not much to say, Jingdong's logistics is second to none, directly out of the box

Looks like it's original, but I'm not even if Virgo is second-hand. It doesn't matter if it's secondhand.

The square box is very good

The silvery aluminum shell feels good, the style is decent, and you don't lose the price in the living room.

Look at the details of each place, the front of the drawing process

Switch interface is on the side of the chassis

The back of the list

Large radiating hole at the bottom

The expansion slot here is a hand-tightening screw. Shiny

From another point of view, by the way, you can look at the thickness of aluminum plate, work is really good

Spare screws and chassis feet

Instructions are also useless

There are too many chassis installed, C2 is particularly good demolition

The accessories that are on hand are all old guys, but with the HTPC exactly, G1840, 4G, the first SSD I started, Yeston's h81.

Vp350

The chassis is small, first put the motherboard into it

Hard drive is still here

C2 is really small, plus the size of the power supply, this line of chaos, simple bundle, do not engage in any take the place, the aluminum chassis is too thin edge, easy to scratch, until now 0 damage will not clear, and avoid In order to trace the perfect blood out of trouble

The work was perfect. Most of the people who read the comments were scratched by the chassis. I took care of the assembly and it was not an accident.

Summarize it simply: There is also a lot of goods on the forum, and I don't describe it in detail. I talk about it. The board of the chassis is not as unpleasant as many valued friends say. Of course, it may be that the aluminum chassis I use is relatively small. Anyway, I think this kind of thickness is more appropriate and the thickness is heavier. This kind of thickness is very good in my hand. And the positioning of this cargo is not the same kind of bearing, it is not used to install iron, this small chassis mounted accessories are small, no need to entanglement thickness. The appearance looks good and the brushed style looks full of upscale. The price is considered to be one of the lowest chassis for the aluminum chassis. The face value is the highest. It should be said that this price and the C2 competition is the establishment of the D5, but I think the C2 is a good thing, and C2 is cheaper. Point, plus JD can also 99-20. Personally feel that this cargo is worth it


AC Contactor

AC Contactor switch mainly used for making or breaking circuit at a long distance, suitable for controlling starting\stopping\reversing of AC motor. AC Contactor of korlen conforms to the requirement of IEC60947-4-1& GB14048.4 standards.

Except AC Contactor, there are many different types of low voltage electric appliances, such as Thermal Relay,Manual Motor Startor ,led light, Circuit Breaker, etc.

AC Contactor,Magnetic Contactor,Wafer Style Valve

Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com