The frequency of JR-XG14 and RG831B

July 20, 2024

JR's frequency-matching method is quite special. Both the remote control and the receiver need to be operated. This section describes the frequency of the XG14 remote controller and the RG831B receiver as an example.

(JR's other DMSS system models can refer to this article)

one

Ready to work

Press the L key on the top page (the button on the left side of the figure) to enter the Function List.

Rotate the flywheel to find SYS.LIST

And press to enter the menu

Then find BIND&RANGE and enter

The receiver needs to use the frequency plug (short circuit) to operate as shown

The receiver enters the state of waiting for the frequency

Second, start to frequency

After the previous preparations are completed, press BIND in the Bind&Range check menu.

Third, complete

Prompt success

Remove the short-circuit line on the receiver and re-power it to use it~

The frequency of JR-XG14 and RG831B

Please indicate the source:

Shenzhen Legend Aerial Photography Technology Co., Ltd.

Shenzhen Legend Zhikong Culture Media Co., Ltd.

Subscription number: Shenzhen legendary aerial photography

Electrical Receptacle

Electrical Receptacle,Switch Outlet,Grounded Outlet,Duplex Receptacle Outlet

Lishui TrimoneÂ Electrical Technology Co., Ltd , https://www.3gracegfci.com