TV box how to check ip address? Manually set fixed ip tutorial
Most commonly used software for TV boxes/network set-top boxes is based on the P2P protocol. Careful partners may find that these software will occupy a lot of bandwidth, and even affect the normal use of computers and mobile phones. If we want to limit the speed, we must know the ip address of the box, because the dynamic acquisition of the ip often changes, in order to limit the speed of the TV box, manually set the ip address is the best choice.
To set up an independent ip, we must first clear the network ip information where the TV box is located. We can quickly find the ip information of the current network through the automatically obtained ip. The specific method is: open the box settings - network - wireless network - click on [router name], and then manually write down the box's automatically obtained IP address, gateway and DNS.
Take the TV box of Alibaba Cloud OS as an example to demonstrate the universal tutorial for setting the fixed ip of the TV box. This general tutorial is applicable to the smart TV box using Ali system and Android system.
1. Open Settings - Select the [Network] option and click the OK button.
2, select the wireless network (if your TV box / network set-top box is connected to the cable, then choose a wired network)
3. Select the name of the router that clicks on your home, as shown in the figure:
4. Change the ip acquisition mode to manual, and some TV boxes only display [manual mode on/off]. We choose to open it.
Select and refer to the detailed parameters for automatically obtaining ip: Modify/Enter ip address, subnet mask, gateway, DNS. As shown in FIG:
Ip Address: 192.168.253.4
Subnet mask: 255.255.255.0 (normal network is generally 255.255.255.0)
Gateway: 192.168.253.1 (that is, the router's login IP address)
DNS: 192.168.253.1 (If you do not know how much the local DNS, it is the same as the gateway by default)
5, refer to the above parameters to enter the corresponding information (note that the red part above must be filled in).
Save and exit the settings, then manually set the TV box fixed ip is completed, the Android TV box settings and Alibaba Cloud OS is similar to the same is to open the settings, then find the network, manually enter the ip information.
To set up an independent ip, we must first clear the network ip information where the TV box is located. We can quickly find the ip information of the current network through the automatically obtained ip. The specific method is: open the box settings - network - wireless network - click on [router name], and then manually write down the box's automatically obtained IP address, gateway and DNS.
Take the TV box of Alibaba Cloud OS as an example to demonstrate the universal tutorial for setting the fixed ip of the TV box. This general tutorial is applicable to the smart TV box using Ali system and Android system.
1. Open Settings - Select the [Network] option and click the OK button.
Select and refer to the detailed parameters for automatically obtaining ip: Modify/Enter ip address, subnet mask, gateway, DNS. As shown in FIG:
Ip Address: 192.168.253.4
Subnet mask: 255.255.255.0 (normal network is generally 255.255.255.0)
Gateway: 192.168.253.1 (that is, the router's login IP address)
DNS: 192.168.253.1 (If you do not know how much the local DNS, it is the same as the gateway by default)
5, refer to the above parameters to enter the corresponding information (note that the red part above must be filled in).
Save and exit the settings, then manually set the TV box fixed ip is completed, the Android TV box settings and Alibaba Cloud OS is similar to the same is to open the settings, then find the network, manually enter the ip information.
Operation Control Desk,Metal Sloped Operating Control Desk,Rittal Raked Operating Control Desk,Industrial Slanted Operating Control Desk
Huaian Qiangsheng Cabinet Co., Ltd. , https://www.qscontrolcabinet.com