Since the development of LED, it has been developing towards technology specialization, brand strategy and production mechanization. In terms of commercial lighting, the division of lighting products is becoming more and more detailed. There are successive news, the industry has a specialization, it is said that not everyone who loves sports will play football, just as not every LED light is suitable for jewelry lighting. For jewelry store decoration, professional jewelry lighting products will highlight the selling point of jewelry products.
However, the threshold of LED lighting downstream industry is too low, so that the jewelry lighting industry is also full of layers of LED lighting products. The light decay is large, the color difference is biased, the color development is low, the illumination is not enough, and so on, some bad products are flooded in the market. For jewellery shop decorators and jewelry dealers, LED is an unfamiliar area, which gives some bad manufacturers a chance. In addition, the LED jewelry lighting industry lacks a unified market standard and lacks a strong regulatory mechanism. Within a few years, the jewelry lighting market will also show mixed conditions.
At the beginning of the 21st century, the core content of LED lighting design is mainly based on the lighting of goods - lighting products; with the changes in the business world, the lighting design in recent years has been combined with the creation of lighting and the creation of indoor environment through the indoor environment. To showcase the brand image, the lighting environment, which also emphasizes the connection between interior design and lighting design and the store's sales strategy.
With the rapid development of the jewelry industry, the decoration and design requirements of the jewelry store shopping environment have become higher and higher. Throughout the design process, lighting design has a great impact on the environment. It is a combination of architecture, optics and aesthetics. The expressions are colorful and varied, not only with sufficient brightness, but also with strong artistry.
Yin Hao, director of engineering channel for Philips Lighting China, believes: “Good shopping mall lighting is one of the effective ways to attract customers to the store and make them interested in goods, thus helping merchants to sell products.†Thus, jewelry lighting In the development of the jewelry industry plays a vital role, jewelry lighting has become an important factor in the success of major jeweler competitors.
After the traditional metal halide lamp and energy-saving lamp were eliminated, LED gradually occupied the market of jewelry lighting. At this stage, LED ceiling lights, LED downlights , LED pole lights, LED light bars, etc. are widely used in the decoration of jewelry stores, energy saving, green environmental protection, low heat and high brightness, long life advantages gradually get jewelry Industry recognition. However, today's customers are not only in need of goods, but also want to enjoy the purchase process, which requires the store's lighting to create a distinctive atmosphere, which is tempting. This requires that jewelry lighting can not stay on the lighting products, but should seek the rendering of the indoor atmosphere and the unification of the overall art. Along with this, lighting design uses a richer design approach, such as the application of dynamic lighting, the depiction of architectural space, the artistry of lighting fixtures, etc., all emphasize the creation of a suitable atmosphere and style.
LED lamp panel is the first to be widely used in Luk Fook Jewellery. Due to its uniform light source, good illumination effect, portable installation and perfect structure, it has gradually become the trend of jewelry lighting development in the future.
During the previous period, the reporter visited the major supermarkets and trading centers in the Shuihu Jewelry Gathering in Luohu, Shenzhen. Many bosses were asked about the decoration design and lighting application. They were helpless and expressed that many store designs and decoration. After the effect is far from their ideal requirements, in terms of lighting, many effects are not very satisfactory. However, during the visit, the reporters still encountered some enterprises with better use. For example, in the conversation between reporters and Yuehao Jewelry, Jinxiang Jewelry, etc., it is known that the combination of lighting application and art is one step ahead. The reporter then called the relevant people of Ou Ge Lighting to understand that Ou Ge's design and production of LED light panels is more perfect. Not only can the color be customized according to the overall effect, but even the shape and size can be made into corresponding artworks according to the needs. . Under the introduction of Ou Ge lighting sales staff, the reporter went to Xili Jinliufu to visit the scene, and it was amazing, perfect for the integration of optics and art. The salesperson said that the company's lamp panel adopts intelligent dual-circuit control, which is more energy-saving and safe.
Jewelry lighting, as one of the important supporting facilities for jewelry display, has attracted more and more attention from jewelers in recent years. How to make jewelry shine more beautifully, how to make LED jewelry lighting combine optics and art has become one of the important topics for lighting companies to spend time researching. But the development of things is always accompanied by the existence of good and bad, so the correct choice becomes especially important.
1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on
Antenk Wire To Board Connectors Ranges:
Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board
Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.
Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.
Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.
PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information
Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.
Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com